User's Manual

User’s Manual
Medi-View User Manual 19
3.1 Fixing the desk stand and assembling the terminal
Due to the critical nature, please ensure that before you begin to install any desk fixing that you consult with the
Hospitals Health & Safety teams and a proper desk Survey is carried out by a certified structural engineers before
any installation. The screw below is certified and tested for use on desk
Fixing the desk stand to desk
Self- tapping screw (4 provided) are provide for this installation
Anchor head: 3/16” inch (around 0.47625 cm)
Length: 1.905 cm
Assembling the terminal onto the desk stand
1. Remove the Top cover of the Terminal exposing the Hinge Metal Frame.
2. Place the Top of the Terminal against the desk stand hinge mount and fix the Terminal to the hinge mount
head with the four M6x45mm Articulating Screws.
3. Connect the DC power cable, RJ-45 and USB cables to the matching connectors in the right of the
Terminal;
4. Replace the Top Cover and fix the screws and rubber bungs.