Medi-View User’s Manual 1st Ed – 02 February 2016 Medi-View User’s Manual 1
Medi-View User Manual Content 1. 2. 3. 4. 5. Getting Started ............................................................................................................... 3 1.1 About the product ....................................................................................................... 4 1.2 What’s in the box ........................................................................................................ 4 PARTS, CONTROLS AND CONNECTORS ...........................................
User’s Manual 1.
Medi-View User Manual 1.1 About the product Smart Terminal Thank you for choosing this Remedi Smart Terminal: Medi-View. The Medi-View is a multimedia Intel® processor-based computer that is designed to serve as a Point of Care (POC) and Point of Information terminal (POI) within healthcare applications. It is a PC based system with 18.5" WXGA LED display,15.6” WXGA LED display, Gigabit Ethernet, multi-COM port and USB 2.0 interfaces and High Definition Audio codec.
User’s Manual 1.3 CAUTION: FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Medi-View User Manual Ce périphérique a également été évalué et démontré conforme aux limites d'exposition aux RF d'IC dans des conditions d'exposition à des appareils mobiles (antennes sont supérieures à 20 cm à partir du corps d'une personne). Radio Frequency (RF) Exposure Information The radiated output power of the Wireless Device is below the Industry Canada (IC) radio frequency exposure limits.
User’s Manual 2.
Medi-View User Manual 2.1 System setup Become familiar Before you set up the Medi-View, take a moment to become familiar with the locations and purposes of the controls, drives, connections and ports, which are illustrated in the figures below. Front When you place the Medi-View upright on the desktop, its front panel appears as shown in the figure below. Image 2-1 Front view of the Medi-View 2 Webcam 2 x Headphone / 2 x USB 2.
User’s Manual Left and Right When you look at the left side of the Medi-View, you will see a handset, fitted to the left docking port. Image 2-2 Left and Right side view of the Medi-View Bottom On the bottom side of the Medi-View you will find the a Smart Card Reader and an I/O area, as shown in the figure below. (Medi-View 18.5”) (Medi-View 15.6”) Medi-View User Manual 9 已註解 [J1]: 由於 Medi-View-156 與 Medi-View-185 兩個 型號之底部開孔及喇叭位置有些差異, 請將其分開說明.
Medi-View User Manual Image 2-3 Bottom view of the Medi-View 1 I/O area bottom 2 Contact Card Reader 3 Reset button 4 Speaker (On Medi-View 15.6”, the speaker is located under the display and above the grab handle) 5 USB 2.0 (2x) 6 Audio Jack (2x) 7 Speaker (On Medi-View 15.
User’s Manual Rear On the rear of the Medi-View you will find the one removable access doors located top of the terminal as shown in the figure below. (With Grab handle. This handle is designed at user’s convenience to move the Medi-View around, DO NOT use it for any other purposes, ex. as a hanger.) (With simple Grab handle. This handle is designed at user’s convenience to move the Medi-View around, DO NOT use it for any other purposes, ex. as a hanger.
Medi-View User Manual CAUTION: * The access doors may only be opened by qualified service personal, no user serviceable parts inside.
User’s Manual Top After removal of the top cover on the Medi-View, you will find the I/O area on the top side of the Medi-View, as shown in the figure below. Image 2-6 Top view of the Medi-View 1 Mini USB port 2 USB A type 2.0 3 RJ45 4 PWR Jack Medi-View User Manual 13 已註解 [J2]: 實際樣品此處是有外殼蓋住, 請加註說明此 處為 Inside I/O ports 說明.
Medi-View User Manual Using Handset Barcode Scanner Scan button Power / Sleep Call & Answer * Home Left Arrow Right Arrow Up Arrow Down Arrow Back End Call # Integrated Help Return View Toggle Mute Channel Up Volume Up Channel Down Volume Down Scan Next Track Scan Previous Track Play/ Pause 14 Medi-View User Manual
User’s Manual Take the Handset 1. When you want to use the handset, lift the handset from the cradle. 2. Replace the handset back to the handset cradle with keypad facing inside.
Medi-View User Manual Start and End a Phone Conversation 1. To make a phone call, enter the numbers by press the number on the keypad and press “Dial” icon. 2. To end a phone conversation, press the “Hang Up” icon. 3. Use the volume control to adjust the volume of the handset. Note: Phone application software and Internet connection are required.
User’s Manual 2.2 Using Barcode Scanner 1. Take the handset and turn it over. 2. Aim the barcode and maintain an appropriate distance between and barcode and scanner. 3. Press SCAN button. The Barcode Scanner will “Beep” when the barcode is successfully read.
Medi-View User Manual 3.
User’s Manual 3.1 Fixing the desk stand and assembling the terminal Due to the critical nature, please ensure that before you begin to install any desk fixing that you consult with the Hospitals Health & Safety teams and a proper desk Survey is carried out by a certified structural engineers before any installation. The screw below is certified and tested for use on desk Fixing the desk stand to desk Self- tapping screw (4 provided) are provide for this installation Anchor head: 3/16” inch (around 0.
Medi-View User Manual 已註解 [W3]: 要加上 file number Disclaimer The installation instructions in this manual should only be used as a guideline and represent a standard installation. It is the responsibility of the Customer, or the appointed Customer’s sub-contractor, to ensure that FX Ergonomics products are installed in direct relevance to the specification required at installation site, and that adequate engineering consultation has been made to ensure correct installation and operation.
User’s Manual 3.3 Installation of HDD, SSD (optional) CAUTION: The installation of the optional HDD and/or SSD drive should be carried out by a professional technician. Only UL-certified hard disks may be installed! Please contact a service technician or your reseller if you need this service. 3.4 Running the BIOS setup program BIOS setup Your Medi-View is likely to have been properly set up and configured by your dealer prior to delivery.
Medi-View User Manual 4.
User’s Manual 4.1 requently used functions 已註解 [J4]: 此處為 4.1 才對, 請幫忙連同後面的章節一 起修正. Using the Smart Card Reader (SCR) 1. Insert the card firmly into the allocated slot with the chip facing towards the front of the terminal. (See figure below). The Smart Card will be recognized by the terminal.
Medi-View User Manual 5.
User’s Manual 5.1 Cleaning agents tested. The Remedi products are designed to be easily cleaned and can use the same standard cleaning solutions used by the hospitals to clean other IT Equipment. When using a cloth or similar please ensure that the cloth is damp / moist and not overly wet, and avoid applying pressure when cleaning the LCD. Cleaning on Medi-View is suggested once a week or whenever it’s necessary. We have also listed a number of medical cleaning solutions we have tested to date.
Medi-View User Manual 5.2 Safety information General recommendations Read the safety and operating instructions before operating the device. Retain safety and operating instructions for future reference. Adhere to all warnings on the device and in the operating instructions manual. Follow all instructions for operation and use. Electrical Shock • • Do not modify this equipment without authorization of the manufacturer. No user-serviceable part inside.
User’s Manual • • • • • • • • • child or adult, and serious damage to the equipment. Improper installation of VESA mounting can result in serious personal injury! Use a VESA mounting solution that can support a weight of at least 10kg. VESA mount installation should be carried out by a professional technician. Please contact the service technician or your reseller if you need this service. Keep this equipment away from excessive humidity. Do not pour any liquid into the vents on the terminal.
Medi-View User Manual Power connection – Equipment with external 120Vac~240Vac Power input • • • • • • Power requirements: The equipment must be powered using the delivered medical approved 120Vac~240Vac AC Input. The medical approved DC ( ) power supply must be powered by the AC mains voltage. The power supply is specified as a part of the ME equipment or combination is specified as a ME system.
User’s Manual 5.3 Environmental information Disposal Information Waste Electrical and Electronic Equipment This symbol on the product indicates that, under the European Directive 2012/19/EU governing waste from electrical and electronic equipment, this product must not be disposed of with other municipal waste. Please dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment.
Medi-View User Manual 零件项目(名称) 有毒有害物质 或元素 Component name Hazardous substances and elements 汞 铅 六价铬 镉 多溴联苯 多溴二苯 醚 Pb Hg Cd Cr6+ PBB 外接电(线 )缆 x o o o o PBDE o External Cables 內 部线路 o o o o o o Internal wiring 塑胶外壳 o o o o o o 电源供应 器 x o o o o o Power Supply Unit 风扇 o o o o o o Fan 文件说 明书 o o o o o o Paper Manuals 光盘 说 明书 o o o o o o Plastic enclosure CD manual O: 表示该有毒有害物质在该部件所有均质材料中的含量均在 SJ/T 11363-2006 标准规定的限量要求以下.
User’s Manual 5.4 Regulatory compliance information Indications for use The Medi-View is not intended to be used in patient monitoring, diagnosis, treatment, alleviation or preven- tion of diseases, injuries and handicaps. FCC class B This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Medi-View User Manual Recommended separation distance The Medi-View is intended for use in an electromagnetic environment in which radiated RF disturbances are controlled. The customer of the user of the Medi-View can help prevent electromagnetic interference by maintaining a minimum distance between portable and mobile RF communications equipment (trans-mitters) and the Medi-View as recommended below, according to the maximum output power of the com- munications equipment. 2.
User’s Manual Indicates the DisplayPort connectors on the device Indicates the manufacturing date Indicates the temperature limitations5 for the device to safely operate within specs.
Medi-View User Manual Indicates a device that can be broken or damaged if not handled carefully when being stored. Indicates a device that needs to be protected from moisture when being stored. Indicates the storage direction of the box. The box must be transported, handled and stored in such a way that the arrows always point upwards. Indicates the maximum number of boxes to be stacked on each other. 15 Indicates that the box should be carried with two persons.
5.8 Technical specifications Technical specifications for the Medi-View 已註解 [J7]: 前方有說明到 Top 部分還有一些 I/O ports, Intel Z3735G/F Baytrail T/CR 15.6” Intel Z3735G/F Baytrail T/CR 18.5” 請幫忙加入說明於此處. Display Screen Type 15.6" HD TFT (1366 x 768 resolution) 18.
Medi-View User’s Manual Headphone Socket 2 x 3.5mm stereo jack Mechanical & Environmental Power Requirement System input: 19Vdc, 4.73A; Power adapter input: 100-240Vac, 50-60 Hz, 2.0-1.0A (for 18.5” and 15.6” models with UL power supply EDAC / EM11013C) Power Connector DC Jack (for 18.5” and 15.
Medi-View User’s Manual 5.9 System Dimensions 5.9.1 15.6” Medi-View (With grab handle. This handle is designed at user’s convenience to move the Medi-View around, DO NOT use it for any other purposes, ex. as a hanger.) (With simple grab handle This handle is designed at user’s convenience to move the Medi-View around, DO NOT use it for any other purposes, ex. as a hanger.
Medi-View User’s Manual 5.9.2 18.5” Medi-View (With grab handle. This handle is designed at user’s convenience to move the Medi-View around, DO NOT use it for any other purposes, ex. as a hanger.) (With simple grab handle This handle is designed at user’s convenience to move the Medi-View around, DO NOT use it for any other purposes, ex. as a hanger.) 5.10 Trouble Shooting Guide Hardware Questions Q. Where is the Power Reset Button located? A.
Medi-View User’s Manual A. Remedi offer a 24 month Return to Base Policy for all product. Please contact your service provider for further details. Q. Where is the Power Button located on the Display? A. The Remedi logo on the bottom of the screen acts as both a Power / Display Off button. There is also a indication LED behind the Remedi Logo to show the power state. Q. How do I fix the Display to the desk stand? A.
