Datasheet

417 SERIES METAL TO METAL (TWO PIECE) CONNECTOR
Plug
.100 (2.54) Contact Spacing x .100 (2.54) Row Spacing with
Staggered Grid
Edacon Hermaphroditic Contact Mating Design
Contact Termination Options include P.C. Tail, Wire Hole
and
90 Degree Bends
Polarizing End Guides
Included, Centre Gu ide Optional
Self Tapping Screws or Mounting Eyelets Supplied
Designed to Mate with 418
Series
Insulator Material: Polyphenylene Sulphide, UL 94V-O ,
Co lour: Green
Contact Material: Phosphor Bronze
Alloy CA-510
Contact
Plating: Gold over Nickel for Entire Contact
Current Rating: 5 Amperes Continuous
Contact Resistance: 10 Milliohms Maximum
Dielectric Wrthstanding Voltage: 1000 VAC rms at Sea Level
Insulati
on Resistance: 5000 Megohms Minimum
Operating Temperature:
-65 to +125 Degrees C
Insertion
and Withdrawal Force: 2 to 16 oz (0.56 to 4.45 N}
per Contact Position
Page81
Example Pa
rt Nu mb er 41 7 - 054 - 560 - 401
Series T T
Total N umber of Contacts -----'
Contact Code -
Guide
and M ounting Options- -- -------'
Series 417
Total
Number of Contacts
1
002, 004, ... 076
004, 008,
... 152
Description
With End Guides
Only
With End and Centre Guides
Contact Code
2
Description & Tall Size Ta il Length "G"
500 Wire Hole .054 x .020 (1.37 x 0.51) .157 (3.99)
520 P.C. Tail .020 (0.51) Square .093 (2.36)
522 P.C. Tail .020 (0.51) Octagonal .250 (6.35)
541 P.C. Tail
.020 (0.51) Octagonal .453( 11 .51)
560 90 Degree Bend (Code 522 and 541 Contacts)
561
90 Degree Bend (Code 522 and 541 Contacts)
Guide and
Mount ing Op t ions
2
Descr ip t ion
401 End Guides Only - 2 Mounting Holes
501 End and Centre Guides- 3 Mounting Holes
Ordering Code N otes
1) All connector sizes up to 76 contacts (end guides only) or up
to 152 contacts (end and centre guides) are available upon
request.
2) Connectors with wire hole or p.c. tail contacts are supplied
with self tapping screws. Connectors with
90 degree bend
contacts are supplied with eyelets.