Data Sheet

1-0. General Description
The purpose of the document is to specify a Single phase AC input, single output
switching power supply. This specification is suitable for: EA11811K series
This product is AC to DC switching power transfer device, it can provide
for a 24V, 8.33A max & 200W max DC output with constant voltage source.
This Specification defines the input, output, performance characteristics, environment,
noise and safety requirement for a power supply.
2-0. Input Requirements
2-1. Input Voltage
Rated Voltage 100-240 Vac +/- 10% full range.
Normal line input 115Vac/60Hz, 230Vac/50Hz.
2-2. Input Frequency
47~63 Hz
2-3. Input Current
a. 2.5A(Max.) @ 115Vac input with full load.
b. 1.3A(Max.) @ 230Vac input with full load.
2-4. Energy saving standards:
2-4-0. Designed to meet the following standard :
CoC Tier 2
2-4-1.Efficiency
Efficiency ≧ 89% (AVG.) normal input & 25%, 50%, 75% ,100% of max output load
2-4-2 No Load Power Consumption.
No Load Watt ≤0.15W at normal line input.
2-5. Configuration
3-wire AC input (Line , Neutral, FG)
2-6. Input Fuse
The hot line side of the input shall have a fuse, rating (6.3A/250V)
2-7. Inrush Current
≦ 60A at 110 Vac At cold start, maximum load.
≦ 120A at 220 Vac At cold start, maximum load.
2-8. Line Regulation
This line regulation is less than ± 1%, of rated output voltage @ full load .