Data Sheet

1-0. General Description
The purpose of the document is to specify a Single phase AC input, single output
switching power supply. This specification is suitable for: EA11011 H Series
This product is AC to DC switching power transfer device, it can provide
for a 12V, 10A max & 120W max DC output with constant voltage source.
This Specification defines the input, output, performance characteristics, environment,
noise and safety requirement for a power supply.
2-0. Input Requirements
2-1. AC Input Voltage
Maximum Voltage: 264Vac
Normal Voltage : 100~240Vac
Minimum Voltage: 90Vac
2-2. AC Input Frequency
Maximum Frequency: 63Hz
Normal Frequency: 50~60Hz
Minimum Frequency: 47Hz
2-3. Input Current
a. 2.0A(Max.) @ 115Vac input with full load.
b. 1.0A(Max.) @ 230Vac input with full load.
2-4. Energy saving standards:
2-4-0. Designed to meet the following standard :
CoC Tier II
2-4-1.Efficiency
Efficiency ≧ 89% ( avg. ) normal input & 25%, 50%, 75% ,100% of max output load
Efficiency ≧79% normal input & 10% of max output load
2-4-2 No Load Power Consumption.
No Load Watt ≦ 0.15W at normal line input.
2-5. Configuration
3-wire AC input (Line , Neutral, FG)
2-6. Input Fuse
The hot line side of the input shall have a fuse, rating (3.15A/250V)
2-7. Inrush Current
≦ 60A at 110 Vac At cold start, maximum load.
≦ 120A at 220 Vac At cold start, maximum load.