Data Sheet

7-0. Mechanical Characteristics.
7-1. Physical Size: 134.5mm (L) * 58.8mm (W) * 25.4mm (H)
7-2. Enclosure material: 94V-0 minimum.
7-3. Output Cable (Reference)
：UL1185 ＃14
7-4. Vibration Test
The vibration frequencies are set at 20Hz, with total amplitude of 1.5mm
along the 3 directions namely X-Y-Z. The each direction should be vibrated
for 60 minutes, after testing no abnormal electrical or mechanical should occur.
7-5. Drop Test (Referencing to CSA C22.2 No.950/UL1950/UL1310/EN62368)
Products shall be dropped from a height of 1000 mm onto a horizontal surface
consists of hardwood at 13mm thick, mounted on two layers of plywood each
19mm to 20mm thick, all supported on a concrete or equivalent non-resilient
floor. Upon conclusion of test , the equipment don’t need be operational , but
need meet Hi-Pot specification requirement .
7-6. Net Weight (Reference)：350g