Data Sheet

2-8. Line Regulation:
This line regulation is less than
± 1%, 100Vac/60Hz-240Vac/50Hz, with Max. load.
2-9. Hold Up Time:
≧ 10mSec. @ 100Vac/60Hz-240Vac/50Hz, with Max. load.
2-10. Rise Time:
≦50mSec. @ 100Vac/60Hz-240Vac/50Hz, with Max. load.
From 10% to 90% of output voltage.
2-11. Turn-ON Time:
The output voltage should rise to 90% of rated output voltage.
in less than 3 SEC. 100Vac/60Hz-240Vac/50Hz, with Max. load.
2-12. Harmonic Standard and Power Factor
The adaptor complied with IEC61000-3-2 Class D harmonic standard while input power
over than 75W. The PF shall > 0.95 @ 100Vac input and > 0.9 @ 240Vac input with
Max. load.
3-0. Output Requirements
3-1. Output Voltage and Current
3-2. Combine Regulation
3-3. Dynamic Load Regulation
±5% excursion for 50% - 100% or 100% - 50% load change of DC output at
any frequency up to 1KHz(duty 50%)
3-4. Ripple
＆ Noise
The power supply shall not exceed the following limits on the indicated voltage for 60Hz or
50Hz ripple,
Switching frequency ripple and noise and dynamic load variations measured with a 20MHz
Output Voltage
(Vdc)
Currnet
Min. (A)
Current
Max. (A)
+12V 0A 7.5A
Output Voltage
(Vdc)
Tolerance (%) Regulation (V)
＋12V
+5%~-5% 11.4V ~ 12.6V