Data Sheet

6-6. EMI
Comply with Standards
CISPR 32, EN 55032 Class B
FCC (PART 15 CLASS B)
7-0. Mechanical Characteristics
7-1. Physical Size : 55mm (L) * 25 mm (W) * 55 mm (H)
7-2. Enclosure material : 94V-0 minimum
7-3. Output Cable (Reference) : UL2468 #22
7-4. Vibration Test
The vibration frequencies are set at 20Hz, with total amplitude of 1.5mm
Along the 3 directions namely X-Y-Z. The each direction should be vibrated
for 60 minutes, after testing no abnormal electrical or mechanical should occur.
7-5. Drop Test (Referencing to CSA C22.2 No.950/UL1950/UL1310/EN62368)
Products shall be dropped from a height of 1000 mm onto a horizontal surface
consists of hardwood at 13mm thick , mounted on two layers of plywood each
19mm to 20mm thick , all supported on a concrete or equivalent non-resilient
floor. Upon conclusion of test , the equipment cannot into hazardous moving
parts and hazardous voltage circuits need be operational , and need meet Hi-Pot
specification requirement .
7-6. Net Weight (Reference) : 70g