Specifications

2
Temporarily install the mounting plate to the wall.
Mark the anchor hole locations through the mounting plate, then remove the mounting plate.
Drill appropriate sized holes and install the anchors.
Secure the mounting plate to the wall.
Screw the anchor screws into the anchors.
Mount the fixture onto the mounting plate and secure it in place with the fixture screws.
Place the bracket against the wall and align with the fixture, then mark the anchor hole locations through the holes on the bracket.
Drill appropriate sized holes and install the anchors.
Secure the bracket to the wall by placing the bracket over the anchors, then screwing the anchor screws into the anchors.
Place the cord in the bracket, then install the cover to the bracket.
Install the handle by screwing it onto the arm.
Screw the lamp into the socket. Refer to the label on the socket for Max Wattage Information.
Adjust the arm by moving the handle left or right until the desired position is reached. Make sure to not rotate the arms past the
indicated point (see figure 1).
1
2
3
4
5
6
1A
7
8
MOUNTING
PLATE
FIXTURE SCREW
CORD
9
10
11
12
FIGURE 1
LAMP
5
13
HANDLE
ARM
3
ANCHOR
SCREW
COVER
BRACKET
ANCHOR
ANCHOR
SCREW
ANCHOR
6
8
10
9
12
11