Installation Guide

INSTALLATION INSTRUCTIONS (Semi-Recessed Sink)

PREPARATION

Before beginning assembly of product, make sure all parts are present. Compare parts with

package contents list and hardware contents list. If any part is missing or damaged, do not attempt

to assemble the product.

Estimated Installation Time: 45 minutes (24 hours for silicone caulk to dry).

Tools Required for Installation (not included): Phillips screwdriver, utility knife or scissors, silicone

caulk, power drill with drill bit, measuring tape, level

2. As shown in the diagram, fully extend the

drawer and locate the plastic levers on the

metal glide tracks. Push the left-side and

right-side levers at the same time to

disengage the drawer from the drawer glides.

Gently lift the drawer up to remove it from

vanity (A).

1. With 2 people, place the vanity on its back on

a flat, scratch free surface. Locate the center

support leg (I) and screw into the base of the

vanity. Once complete, lift the vanity back up

into the upright position.