Specifications

※Operating Instruction
1. Connect one pair handles to BIO outlet.
There are 3 pairs different handles available:Mushroom handles:
For large area such as the cheeks, forehead, neck, etc. Spot handles:
For small area, such as nasal fossa, and so on.Handles without Cap:
Please insert the Cotton stick (which you can find them in the plastic
bag), then dampen the cotton with anti-wrinkle essence or other kind
of essences.
Note: Handles with damp cotton stick conducts electricity stronger
than the other 2 kinds of handles.
2. Select the time as you like about 15 minutes or 30 minutes.
3. Select the strong or weak intensity. Adjust the BIO intensity slowly
from minimum to maximum, for commonly use, do not set the
intensity to maximum unless necessary.
9 intensity levels -- 1 to 9: it is for intensity of BIO, from weak to
strong. Please choose the suitable intensity according to clients'
requirments or tolerance capability.
4. Select the mode just you like such as for bust, neck or face.
Usage for mode1, 2 and 3:
1: pulse wave 50HZ -- use for skin around eye.
2: pulse wave 70HZ -- use for face.
3: pulse wave 100HZ -- use for body.
5. BIO function has to be operated with beauty products, such as Gel,
whiten products, slimming products and so on to conduct
micro-current. You can also apply some beauty essence on the skin
before you choose BIO function. You can feel very little if you operate
BIO without applying beauty care cream products in advance.
Usually your face is very sensitive. If you want to feel it, apply some
cream to your face, select a mode and an intensity level, and you can
feel the micro-current working obviously. Even your eye can feel light
changes due to the pulse of micro-current.
※ Accessories
Spot handle×1 pair
Mushroom handle×1 pair
Handles without Cap×1 pair
※Operating Instruction
When lightly touched to the surface of the skin or scalp, a mild high
frequency electrical current passes through the neon or argon
gas-filled glass electrode which then produces charged particles.
This in turn causes the glass electrode to emit a calming energy in
the form of an orange or violet 'glow'. When applied to the skin, the
subject will experience a mild zapping or buzzing sensation.
1. Simply insert the desired glass electrode (metal end first) into the
hole at the end of the handle.
2. Connect the handle's wire to the machine (it only fits one way)
making sure to fasten it into place the securing ring.
3. Using the high frequency intensity knob/ power switch, turn it to
the “on” position and the glass electrode should light up.
4. Turning the intensity knob slowly from minimum to maximum to
adjust the current to match the desired need, do not set the
intensity to maximum unless necessary.
5. When the machine is not in use, make sure the power switch is in
the “Off” position.
Caution:
1- Please first turn off the high frequency power before exchange
into another shape glass electrode.
2- Do not drop or immerse the handle into water as this can cause
the machine to short, damaging the machine/handle and
causing possible serious injury to the person(s) in contact with
the machine.
※Function
Promote blood circulation, strengthen activity of lymph, supply
nutrition to scarfskin, strengthen cell metabolism, sterilize and
diminish inflammation, promote the wound to heal up.
High-Frequency Function
High Frequency Handle×1
Glass Spoon Electrode×1
Glass Mushroom Electrode×1
Glass angled Spot Electrode×1
(3 glass electrodes, different
electrode for different area)
※ Accessories
32 33