Specifications

After the initial course of microcurrent treatments, you only need
a booster treatment on average around every 4-6 weeks. A
microcurrent facelift utilizes microcurrent technology which uses
gentle electrical stimulation to trigger the body's natural skin
enhancement chemicals at a cellular level.The microcurrent facelift
procedure itself takes approximately one hour to complete and is
virtually painless. Use two pronged instrument to gently deliver
electrical stimulation to the muscles and tissues of the face and/or
neck. The microcurrent facelift procedure requires no anesthesia, no
recovery time, no down time from work, and has no irritating side
effects. To achieve the ultimate benefits of a microcurrent facelift,
approximately ten treatment sessions are recommended. Routine
follow up treatments are performed to maintain microcurrent facelift
results.
※ Accessories
Spot handle×1 pair Mushroom handle×1 pair
Handles without Cap×1 pair
※Operating Instruction
1. Connect one pair handles to BIO outlet.
There are 3 pairs different handles available:
Mushroom handles: For large area such as the cheeks, forehead,
neck, etc. Spot handles: For small area, such as nasal fossa,
and so on.Handles without Cap: Please insert the Cotton stick
(which you can find them in the plastic bag), then dampen the cotton
with anti-wrinkle essence or other kind of essences.
Note: Handles with damp cotton stick conducts electricity stronger
than the other 2 kinds of handles.
2. Select the time as you like about 15 minutes or 30 minutes.
3. Select the strong or weak intensity. Adjust the BIO intensity slowly
from minimum to maximum, for commonly use, do not set the
intensity to maximum unless necessary.
9 intensity levels -- 1 to 9: it is for intensity of BIO, from weak to strong.
Please choose the suitable intensity according to clients' requirments
or tolerance capability.
4. Select the mode just you like such as for bust, neck or face.
Usage for mode1, 2 and 3:
1: pulse wave 50HZ -- use for skin around eye.
2: pulse wave 70HZ -- use for face.
3: pulse wave 100HZ -- use for body.
5. BIO function has to be operated with beauty products, such as Gel,
whiten products, slimming products and so on to conduct
micro-current. You can also apply some beauty essence on the skin
before you choose BIO function. You can feel very little if you operate
BIO without applying beauty care cream products in advance.
Usually your face is very sensitive. If you want to feel it, apply some
cream to your face, select a mode and an intensity level, and you can
feel the micro-current working obviously. Even your eye can feel light
changes due to the pulse of micro-current.
Function&Treament
18 19