User Manual

3
EN
RUCKUS | TORMENT
®
™
Transmitter
Frequency 2.4GHz
Power Output (EIRP) ≤10 dBm
Battery AA x 4
Servo
Power Supply 4.8V~6V
Output Torque 41.66 oz (3 kg-cm)
Operating Speed 0.23sec/60 degrees of travel
Size 55.6 x 18 x 30mm
Electronic Speed Control (ESC)
Input Voltage 2–3S LiPo; 5–9 cell NiMH/NiCd
Electric Capacity Forward 60A/360A
BEC Voltage 6V
Size 35.6mm x 34mm x 18mm
Weight 1.41 oz (40 g)
Quick Start....................................................................................................4
Vehicle Preparations ....................................................................................4
Installing the Battery.................................................................................4
Transmitter Controls .................................................................................. 5
Installing Transmitter Batteries ................................................................5
Binding ......................................................................................................6
Changing the Throttle Limit ......................................................................6
Getting Started..........................................................................................6
Operation......................................................................................................7
When You Are Finished................................................................................7
Motor Care ...................................................................................................7
Maintenance ................................................................................................8
Setting the Gear Mesh..............................................................................8
Electronic Speed Control (ESC) .................................................................8
Electrical Layout ........................................................................................ 8
Shock Cleaning..........................................................................................9
Fasteners ...................................................................................................... 9
Troubleshooting Guide ...............................................................................10
Limited Warranty .......................................................................................11
Warranty and Service Contact Information ...............................................12
FCC Information..........................................................................................12
IC Information.............................................................................................12
EU Compliance Statement .........................................................................12
Instructions for Disposal of WEEE by Users in the European Union .........12
Ruckus Parts Diagram ......................................................................... 46–47
Torment Parts Diagram ....................................................................... 48–49
Replacement Parts .............................................................................. 50–51
Optional Parts.............................................................................................51
TABLE OF CONTENTS
BOX CONTENTS
• ECX
®
Ruckus
®
Monster Truck or Torment
™
Short Course Truck
• Spektrum
™
STX2
®
2-CH Transmitter (SPMSTX200)
• AA (4) Batteries
• Dynamite
®
15T Brushed Motor (DYN1172)
• Dynamite
®
60A WP Brushed ESC (DYNS2210)
• Spektrum
™
SRX200 2-CH Receiver (SPMSRX200)
SPECIFICATIONS
Wet Conditions Maintenance
• Remove the battery pack(s) and dry the contacts. If you have an air
compressor or a can of compressed air, blow out any water that may be
inside the recessed connector housing.
• Remove the tires/wheels from the vehicle and gently rinse the mud and dirt
off with a garden hose. Avoid rinsing the bearings and transmission.
NOTICE: Never use a pressure washer to clean your vehicle.
• Use an air compressor or a can of compressed air to dry the vehicle and
help remove any water that may have gotten into small crevices or corners.
• Spray the bearings, drive train, fasteners and other metal parts with a
water-displacing light oil or lubricant. Do not spray the motor.
• Let the vehicle air dry before you store it. Water (and oil) may continue to
drip for a few hours.
• Increase the frequency of disassembly, inspection and lubrication of the
following:
• Front and rear axle hub assembly bearings.
• All transmission cases, gears and differentials.
• Motor—clean with an aerosol motor cleaner and re-oil the bushings
with lightweight motor oil.
2.4GHZ DIGITAL
RADIO SYSTEM