User Manual

RUCKUS

4WD

CAUTION: If using rechargeable batteries, charge only rechargeable batteries. Charging

non-rechargeable batteries may cause the batteries to burst, resulting in injury to persons and/

or damage to property.

This transmitter requires 4 AA batteries.

1. Remove the battery cover from the transmitter.

2. Install the batteries as shown.

3. Install the battery cover.

We recommend using only alkaline AA batteries in the transmitter, however, it is possible to use

rechargeable Ni-MH batteries.

• Never install damaged batteries.

• Never install batteries of mixed types or of different ages in the transmitter.

• Always remove exhausted batteries.

• Always remove batteries before storing the transmitter.

• Low battery power can result in loss of control of the RC vehicle.

TRANSMITTER BATTERY SAFETY PRECAUTIONS

REMOVING THE VEHICLE BODY

INSTALLING TRANSMITTER BATTERIES

CAUTION: Risk of explosion if battery is replaced by an incorrect type. Dispose of used

batteries according to national regulations.