User Manual

4
EN
boost
2
5
3
COMPONENTS
VEHICLE PREPARATIONS
1
CHARGING THE VEHICLE BATTERY
1. Connect the AC power cord to the power slot on the charger, then
connect the other end of the power cord to an AC power source.
2. The Power LED and Charging LED will turn GREEN when the charger
is connected to the AC power source.
3.Connectthebatterypackconnectortothechargeconnector.
4.PresstheOn/Offbuttontochargethebattery.TheChargingLED
turns RED.
5. When the battery pack is fully charged, the Charging LED will
turn GREEN.
6.PresstheOn/Offbuttontostopcharging.Disconnectthebattery
pack connector from the charge connector.
CAUTION: If at any time during the charge process the
battery pack(s) becomes hot to the touch, unplug the battery
immediately and discontinue the charge process.
The vehicle battery charger produces 2000 milliAmps (2 Amps) per hour.
Divide the mAh capacity on the label of a battery by 2000 to know how
longbatterychargingwillrequire.Forexample,an1800mAhbattery
requires0.9hours(54minutes)tocharge.
1. ECX
™
Boost
™
1/10-scale Buggy
2. ECX
™
2.4GHz Transmitter
3. AA(4)Batteries
4. 2APeakBatteryCharger(DYN4113)
5. Dynamite
®
Speedpack
™
7.2V
Ni-MH battery (DYN1050EC)
CHARGING WARNINGS
AND PRECAUTIONS
• Readallsafetyprecautionsandliteraturepriortouseofthis
product.
• Neverallowminorstochargebatterypacks.
• Neverattempttochargedeadordamagedbatteries.
• Neverchargeabatteryifthecablehasbeenpinchedorshorted.
• Neverallowbatteriesorchargerstocomeintocontactwith
moisture at any time.
• Neverchargebatteriesinextremelyhotorcoldplaces
(recommended between 50–80°F or 10–26°C) or place
in direct sunlight.
• AlwaysuseonlyNi-MHrechargeablebatteries.Thischargercannot
charge batteries such as “heavy duty”, “alkaline”, “mercury” or
“lithium" battery.
• Alwaysconnectthepositiveredlead(+)andnegativeblacklead(-)
terminals of the battery to the charger terminals correctly.
• Alwaysdisconnectthebatteryandchargerafterchargingandlet
them cool between charges.
• Alwaysinspectthebatterybeforecharging.
• AlwaysterminateallprocessesandcontactHorizonHobbyifthe
product malfunctions.
• Alwaysmakesureyouknowthespecificationsofthebatterytobe
charged or discharged to ensure it meets the requirements of this
charger.
• Neverconnectmorethanonebatterypacktothischargeratatime.
• Alwaysconstantlymonitorthetemperatureofthebatterypack
while charging.
• Alwaysendthechargingprocessifthechargerorbatterybecomes
hot to the touch or starts to change form during the charge process.
4