User Manual

6
6
Installing Your Transmitter
Batteries
This transmitter requires 4 AA batteries.
1. Remove the battery cover from the
transmitter.
2. Install the batteries as shown.
3. Install the battery cover.
CAUTION: NEVER
remove the transmitter
batteries while the
model is powered on. Loss of
model control, damage or injury
may occur.
CAUTION: If using
rechargeable batteries,
charge only rechargeable
batteries. Charging non-
rechargeable batteries may
cause the batteries to burst, resulting in injury to
persons and/or damage to property.
CAUTION: Risk of explosion if battery is
replaced by an incorrect type. Dispose of
used batteries according to national regulations.
7
Power on the transmitter
8
Power on the vehicle
10
Control Test
1. Do a test of the transmit-
ter’s control of the vehicle
with the vehicle’s wheels
off the ground.
2. Start driving slowly, and,
if the vehicle does not go
straight, adjust the steering
trim dial on the transmitter.
tooltip
9
Re-install the body on the
vehicle