Users Manual

____________________________________________________________________________________
SR200 IFU v1 Page 1
1.0 Introduction
Congratulations on your purchase of the Smart Repeater SR200 for ECPIN, the truly Wireless
Food Thermometer. Smart Repeater SR200 is designed dedicated for the Wireless Food
Thermometer ECPIN. It can automatically search the signal sent by ECPIN, duplicate the data
and resend out. In addition, SR200 provides the charging function to ECPIN. SR200 can be
powered up either by USB power source or AAA battery. With the AAA battery and the
magnets, SR200 can stick onto the metal surface where is close to the cooking equipment, such
as oven, grill, or smoker etc. to extend the operating range of ECPIN. With the smart design of
SR200, there is no installation nor setup required. You just need to power up the SMART
Repeater SR200 and place it close to ECPIN. Then, you can enjoy the extended range of
operation in using ECPIN.
1.1 Before you start using Smart Repeater SR200
1. Please make sure to read the instruction manual carefully. This information will help
you to familiarize yourself with your new device, to find out important details about its
first use and how to operate it and to get advice in the event of malfunction.
2. Following and respecting the instructions in your manual will prevent damage to your
device and loss of your statutory rights arising from defects due to incorrect use.
3. Please take note of the safety advice especially in section 1.2.
1.2 Important Notes – Please read this carefully before use
1. This product is not intended for using by persons with ages 12 and under.
2. This product is exclusively used for charging and repeating signals of ECPIN. It should
only be used as described within this User Manual.
3. Take out the battery whenever you are not using the Smart Repeater.
4. Always slide the power source selector to “USB” position after use.
5. Always use the latest version of the software APP for ECPIN. Go to the official website
(Apple APP Store for iOS device and Google Play for Android device) to download and
install the software APP for ECPIN.
6. Make sure the mobile phone is within the range of monitoring distance during cooking.
The distance of operation is dependent on the actual working environment. It will be
shorter if ECPIN or SR200 is covered or blocked by a metal case.
7. Do not let the Smart Repeater stay at high temperature.
8. The supplier will not be liable for any damage of SR200 due to misuse of the device.