User manual

ECTACO Partner
®
B-3 Travel Phrasebook User Manual
8
GETTING STARTED
General View
The general view and external appliances of ECTACO Partner
®
B-3 are shown
below:
• Press the On/Off button to turn the device on. When the device is on, press and
hold the On/Off button for approximately two seconds to turn on the backlight. Press
and hold the On/Off button once again to turn the backlight off.
• Use the connecting cable provided in the standard package to connect ECTACO
Partner
®
B-3 to the LS-101 loudspeaker.
• Tap the screen with the supplied pointing device called the stylus which, when not
in use, is conveniently kept in a special slot at the side of the device's back panel.
• In most windows or dialog boxes, tap OK or Done to accept changes or Cancel to
exit without saving any changes.
♦ Note: If, for some reason, using the stylus does not provide the desired effect,
you may need to recalibrate the screen (see Launcher Menu on page 11).
Power Supply
ECTACO Partner
®
B-3 is powered by two AAA (LR03) batteries. ECTACO Partner
®
LS-101 loudspeaker is powered by four AAA (LR03) batteries. If the battery power
runs too low, the unit will start up when you press the On/Off button but will then shut
off automatically. When this happens, please replace the batteries immediately to
avoid the risk of losing user data.