Datasheet

33
Using BIOS
Integrated Peripherals
This page sets up some parameters for peripheral devices connected to the system.
SATA Configuration (Enhanced)
Use this item to show the Serial ATA Configuration options: Disabled, Compatible,
Enhanced.
OnBoard SATA Mode (IDE)
Use this item to select the mode of the Serial ATA.
Onboard AUDIO Function (Enabled)
Use this item to enable or disable the onboard Audio function.
Intel GLAN Function (Enabled)
Enables or disables the Intel Giga LAN function.
Intel GLAN Boot ROM (Disabled)
Use this item to enable and disable the booting from the Intel Giga LAN or a
network add-in card with a remote boot ROM installed.
Realtek GLAN Function (Enabled)
Enables or disables the Realtek Giga LAN function.
Realtek GLAN Boot ROM (Disabled)
Use this item to enable and disable the booting from the Realtek Giga LAN or a
network add-in card with a remote boot ROM installed.
Serial Port1 Address (3F8/IRQ4)
Use this item to enable or disable the onboard COM1 serial port, and to assign a
port address.
Onboard IR (Disabled)
Use this item to enable or disable the onboard infrared port, and to assign a port
address.
USB Functions (Enabled)
Use this item to enable or disable the USB function.
F9: Optimized Defaults
F1:General Help
CMOS Setup Utility - Copyright (C) 1985-2008, American Megatrends, Inc.
Integrated Peripherals
SATA Configuration Enhanced
Onboard SATA Mode IDE
Onboard AUDIO Function Enabled
Intel GLAN Function Enabled
Intel GLAN Boot ROM Disabled
Realtek GLAN Function Enabled
Realtek GLAN Boot ROM Disabled
Serial Port1 Address 3F8/IRQ4
Onboard IR Disabled
USB Functions Enabled
Legacy USB Support Enabled
On Chip SATA2 Controller IDE Mode
Help Item
F10: Save ESC: Exit+/-/: Value
Enter : Select: Move
mnlk
Options
Disabled
Compatible
Enhanced