Datasheet

31
Using BIOS
APIC Mode (Enabled)
This item allows you to enable or disable the APCI (Advanced Programmable Inter-
rupt Controller) mode. APIC provides symmetric multi-processing (SMP) for sys-
tems, allowing support for up to 60 processors.
1st/2nd3rd Boot Device (Corsair Flash Voyag/CD/DVD/1st FLOPPY DRIVE)
Use this item to determine the device order the computer used to look for an
operating system to load at start-up time. The devices showed here will be different
depending on the exact devices installed on your motherboard.
Hard Disk Drives
f
Scroll to this item and press <Enter> to view the following screen:
CMOS SETUP UTILITY – Copyright (C) 1985-2008, American Megatrends, Inc.
Hard Disk Drives
Hard Disk Drives
1st Drive
2nd Drive Corsair Flash Voyag
Help Item
Specifies the boot
sequence from the
available devices.
mnlk
: Move
F10: Save ESC: Exit
Enter : Select
+/-/: Value
F1: General Help
F9: Optimized Defaults
ST3160812AS
Removable Drives
f
Scroll to this item and press <Enter> to view the following screen:
CMOS SETUP UTILITY – Copyright (C) 1985-2008, American Megatrends, Inc.
Removable Drives
Removable Drives
1st Drive
Help Item
Specifies the boot
sequence from the
available devices.
mnlk
: Move
F10: Save ESC: Exit
Enter : Select
+/-/: Value
F1: General Help
F9: Optimized Defaults
1st FLOPPY DRIVE
Press <Esc> to return to the Advanced Setup page.
Press <Esc> to return to the Advanced Setup page.