Preface Copyright This publication, including all photographs, illustrations and software, is protected under international copyright laws, with all rights reserved. Neither this manual, nor any of the material contained herein, may be reproduced without written consent of the author. Version 1.0A Disclaimer The information in this document is subject to change without notice.
ii Declaration of Conformity This device complies with part 15 of the FCC rules. Operation is subject to the following conditions: • • This device may not cause harmful interference, and This device must accept any interference received, including interference that may cause undesired operation Canadian Department of Communications This class B digital apparatus meets all requirements of the Canadian Interferencecausing Equipment Regulations.
iii TABLE OF CONTENTS Preface i Chapter 1 1 Introducing the Motherboard 1 Introduction......................................................................................1 Feature...............................................................................................2 Motherboard Components.............................................................5 Chapter 2 7 Installing the Motherboard 7 Safety Precautions............................................................................
iv PCI/PnP Setup........................................................................31 PC Health Status....................................................................32 Frequency/Voltage Control..................................................34 Supervisor Password.............................................................35 User Password....................................................................35 Save & Exit Setup....................................................................
1 Chapter 1 Introducing the Motherboard Introduction Thank you for choosing the TIGD-CI4 motherboard. This motherboard is a high performance, enhanced function motherboard with onboard Intel® Atom D425 singlecore CPU (13W) for high-end business or personal desktop markets. This motherboard is based on Intel ® NM10 Chipset for best desktop platform solution. NM10 is a single-chip, highly integrated, high performance Hyper-Threading peripheral controller, unmatched by any other single chip-device controller.
2 Feature Processor • Onboard Intel® Atom D425 single-core CPU • Supports “Hyper-Threading” technology CPU “Hyper-Threading” technology enables the operating system into thinking it’s hooked up to two processors, allowing two threads to be run in parallel, both on separate “logical” processors within the same physical processor. Chipset The Intel® NM10 chipset is based on an innovative and scalable architecture with proven reliability and performance.
3 Integrated I/O The motherboard has a full set of I/O ports and connectors: • • • • • • • Two PS/2 ports for mouse and keyboard One optional parallel port One serial port One VGA port Four USB ports One LAN port Audio jacks for microphone, line-in and line-out BIOS Firmware This motherboard uses AMI BIOS that enables users to configure many system features including the following: • Power management • Wake-up alarms • CPU parameters • CPU and memory timing The firmware can also be used to set parameters
4 Specifications CPU • • Onboard Intel® single-Core Atom D425 processor DMI 667Mb/s Chipset • Intel® NM10 Express Memory • • • Single-channel DDR3 memory architecture 2 x 204-pin DDR3 SODIMM socket support up to 4 GB Supports DDR3 800 DDR3 SDRAM Expansion Slots • 1 x PCI slot Storage • 2 x Serial ATAII devices Audio • ALC662 5.
5 Motherboard Components Table of Motherboard Components This concludes Chapter 1. The next chapter explains how to install the motherboard.
6 Memo Introducing the Motherboard
7 Chapter 2 Installing the Motherboard Safety Precautions • • • • • Follow these safety precautions when installing the motherboard Wear a grounding strap attached to a grounded device to avoid damage from static electricity Discharge static electricity by touching the metal case of a safely grounded object before working on the motherboard Leave components in the static-proof bags they came in Hold all circuit boards by the edges.
8 Do not over-tighten the screws as this can stress the motherboard. Checking Jumper Settings This section explains how to set jumpers for correct configuration of the motherboard. Setting Jumpers Use the motherboard jumpers to set system configuration options. Jumpers with more than one pin are numbered. When setting the jumpers, ensure that the jumper caps are placed on the correct pins. The illustrations show a 2-pin jumper. When the jumper cap is placed on both pins, the jumper is SHORT.
9 Checking Jumper Settings The following illustration shows the location of the motherboard jumpers. Pin 1 is labeled. Jumper Settings Jumper Type Description Setting (default) 1-2: NORMAL CLR_CMOS 3-pin Clear CMOS 2-3: CLEAR Before clearing the CMOS, make sure to turn off the system. 1 CLR_CMOS 1. To avoid the system instability after clearing CMOS, we recommend users to enter the main BIOS setting page to “Load Default Settings” and then “Save and Exit Setup”. 2.
10 Installing Hardware Installing Memory Modules This motherboard accommodates two memory modules. It can support two 204-pin DDR3 SODIMM. The total memory capacity is 4 GB. DDR3 SDRAM memory module table Memory module Memory Bus DDR3 800 400 MHz You must install at least one module in any of the two slots. The total memory capacity is up to 4 GB. Do not remove any memory module from its antistatic packaging until you are ready to install it on the motherboard. Handle the modules only by their edges.
11 Expansion Slots Installing Add-on Cards The slot on this motherboard is designed to hold expansion card and connect it to the system bus. Expansion slot is a mean of adding or enhancing the motherboard’s features and capabilities. With these efficient facilities, you can increase the motherboard’s capabilities by adding hardware that performs tasks that are not part of the basic system. PCI Slot This motherboard is equipped with one standard PCI slot.
12 Follow these instructions to install an add-on card: 1 2 3 Remove a blanking plate from the system case corresponding to the slot you are going to use. Install the edge connector of the add-on card into the expansion slot. Ensure that the edge connector is correctly seated in the slot. Secure the metal bracket of the card to the system case with a screw. 1.
13 Connecting Optional Devices Refer to the following for information on connecting the motherboard’s optional devices: SATA1~2: Serial ATA connectors These connectors are used to support the new Serial ATA devices for the highest data transfer rates (3.0 Gb/s), simpler disk drive cabling and easier PC assembly. It eliminates limitations of the current Parallel ATA interface. But maintains register compatibility and software compatibility with Parallel ATA.
14 F_USB1~2: Front Panel USB headers The motherboard has four USB ports installed on the rear edge I/O port array. Additionally, some computer cases have USB ports at the front of the case. If you have this kind of case, use auxiliary USB connector to connect the front-mounted ports to the motherboard.
15 Installing a Hard Disk Drive/CD-ROM/SATA Hard Drive This section describes how to install SATA connector About SATA Connectors Your motherboard features two SATA connectors supporting a total of two drives. SATA refers to Serial ATA (Advanced Technology Attachment) is the standard interface for the IDE hard drives which are currently used in most PCs. These connectors are well designed and will only fit in one orientation.
16 Connecting I/O Devices The backplane of the motherboard has the following I/O ports: PS2 Mouse Use the upper PS/2 port to connect a PS/2 pointing device. PS2 Keyboard Use the lower PS/2 port to connect a PS/2 keyboard. Parallel Port (LPT) (optional) Use LPT to connect printers or other parallel communica tions devices. COM1 Port Use the COM port to connect serial devices such as mice or fax/modems. VGA Port Connect your monitor to the VGA port.
17 Connecting Case Components After you have installed the motherboard into a case, you can begin connecting the motherboard components. Refer to the following: 1 Connect the CPU cooling fan cable to CPU_FAN. 2 Connect the standard power supply connector to ATX_POWER. 3 Connect the case switches and indicator LEDs to the F_PANEL. 4 Connect the system cooling fan connector to SYS_FAN1. 5 Connect the auxiliary case power supply connector to ATX12V.
18 CPU_FAN: CPU Cooling FAN Power Connector Pin 1 2 3 4 Signal Name Function GND System Ground +12V Power +12V Sense Sensor PWM PWM Users please note that the fan connector supports the CPU cooling fan of 1.1A ~ 2.2A (26.4W max) at +12V. ATX_POWER: ATX 24-pin Power Connector Pin 1 2 3 4 5 6 7 8 9 Signal Name Pin Signal Name 13 14 15 16 17 18 19 20 21 +3.3V +3.3V Ground +5V Ground +5V Ground PWRGD +5VSB +3.
19 Front Panel Header The front panel header (F_PANEL) provides a standard set of switch and LED headers commonly found on ATX or micro-ATX cases.
20 Memo Installing the Motherboard
21 Chapter 3 Using BIOS About the Setup Utility The computer uses the latest “American Megatrends Inc. ” BIOS with support for Windows Plug and Play. The CMOS chip on the motherboard contains the ROM setup instructions for configuring the motherboard BIOS. The BIOS (Basic Input and Output System) Setup Utility displays the system’s configuration status and provides you with options to set system parameters.
22 Press the delete key to access the BIOS Setup Utility. CMOS Setup Utility - Copyright (C) 1985-2009, American Megatrends, Inc. Standard CMOS Setup Advanced Setup Advanced Chipset Setup Integrated Peripherals Power Management Setup PCI/PnP Setup PC Health Status Frequency/Voltage Control Load Default Settings Supervisor Password User Password Save & Exit Setup Exit Without Saving : Move Enter : Select F1:General Help +/-/: Value F10: Save ESC: Exit F9: Load Default Settings v02.
23 Using BIOS When you start the Setup Utility, the main menu appears. The main menu of the Setup Utility displays a list of the options that are available. A highlight indicates which option is currently selected. Use the cursor arrow keys to move the highlight to other options. When an option is highlighted, execute the option by pressing . Some options lead to pop-up dialog boxes that prompt you to verify that you wish to execute that option.
24 For the purpose of better product maintenance, the manufacture reserves the right to change the BIOS items presented in this manual. The BIOS setup screens shown in this chapter are for reference only and may differ from the actual BIOS. Please visit the manufacture’s website for updated manual. Standard CMOS Setup This option displays basic information about your system. CMOS Setup Utility - Copyright (C) 1985-2009, American Megatrends, Inc.
25 Type (Auto) Use this item to configure the type of the IDE device that you specify. If the feature is enabled, it will enhance hard disk performance by reading or writing more data during each transfer. PIO Mode (Auto) Use this item to set the PIO mode to enhance hard disk performance by optimizing the hard disk timing. DMA Mode (Auto) DMA capability allows user to improve the transfer-speed and data-integrity for compatible IDE devices. Press to return to the Standard CMOS Setup page.
26 Intel (R) HT Technology (Enabled) This item enables or disables Intel HT Technology support. CPU Host Clock (200MHz) Enables or disables the control of CPU host clock. Enabled will allow the CPU Host Frequencyitem below to be configurable. Note: If your system fails to boot after overclocking, please wait for20 seconds to allow for automated system reboot, or clear the CMOS values to reset the board todefault values.
27 Removable Drives (Press Enter) Scroll to this item and press to view the following screen: CMOS Setup Utility - Copyright (C) 1985-2009, American Megatrends, Inc. Removable Drives Help Item Removable Drives 1st Drive 1st FLOPPY DRIVE : Move Enter : Select F1: General Help Specifies the boot sequence from the available devices. +/-/: Value F10: Save ESC: Exit F9: Load Default Settings Press to return to the Advanced Setup page.
28 Advanced Chipset Setup This page sets up more advanced information about your system. Handle this page with caution. Any changes can affect the operation of your computer. CMOS Setup Utility - Copyright (C) 1985-2009, American Megatrends, Inc.
29 Integrated Peripherals This page sets up some parameters for peripheral devices connected to the system. CMOS Setup Utility - Copyright (C) 1985-2009, American Megatrends, Inc.
30 USB Functions (Enabled) Use this item to enable or disable the USB function. Legacy USB Support (Enabled) Use this item to enable or disable support for legacy USB devices. Press to return to the main menu setting page. Power Management Setup This page sets up some parameters for system power management operation. CMOS Setup Utility - Copyright (C) 1985-2009, American Megatrends, Inc.
31 Resume By PS2 KB (S3) (Disabled) This item enables or disables you to allow keyboard activity to awaken the system from power saving mode. Resume By PS2 MS (S3) (Disabled) This item enables or disables you to allow mouse activity to awaken the system from power saving mode. Resume on RTC Alarm (Disabled) The system can be turned off with a software command. If you enable this item, the system can automatically resume at a fixed time based on the system’s RTC (realtime clock).
32 PC Health Status On motherboards support hardware monitoring, this item lets you monitor the parameters for critical voltages, temperatures and fan speeds. CMOS Setup Utility - Copyright (C) 1985-2009, American Megatrends, Inc. PC Health Status -=- System Hardware Monitor-=Shutdown Temperture Disabled Smart Fan Function Press Enter CPU Temperture :72°C/161°F System Fan Speed : N/A CPU Fan Speed : N/A +12.0V : 12.032 V Vcc : 4.730V +3.30V : 3.084V CPU Core : 1.182V VDIMM : 1.
33 SMART Fan start PWM value (28) This item is used to set the start PWM value of the CPU smart fan. CPU DeltaT (+3) This item specifies the range that controls CPU temperature and keeps it fromgoing so high or so low when smart fan works. SMART Fan start TEMP. (° C ) (43) This item is used to set the start temperature of the smart fan. SMART Fan Slope PWM value (5 PWM value/°C ) This item is used to set the Slope Select PWM of the smart fan.
34 Frequency/Voltage Control This page enables you to set the clock speed and system bus for your system. The clock speed and system bus are determined by the kind of processor you have installed in your system. CMOS Setup Utility - Copyright (C) 1985-2009, American Megatrends, Inc.
35 Supervisor Password This page helps you install or change a password. CMOS Setup Utility - Copyright (C) 1985-2009, American Megatrends, Inc. Supervisor Password Supervisor Password Help Item : Installed Install or Change the password. Change Supervisor Password Press Enter : Move Enter : Select F1: General Help +/-/: Value F10: Save ESC: Exit F9: Optimized Defaults Supervisor Password (Not Installed) This item indicates whether a supervisor password has been set.
36 Save & Exit Setup Highlight this item and press to save the changes that you have made in the Setup Utility and exit the Setup Utility. When the Save and Exit dialog box appears, select [OK] to save and exit, or select [Cancel] to return to the main menu. Exit Without Saving Highlight this item and press to discard any changes that you have made in the Setup Utility and exit the Setup Utility.
37 Chapter 4 Using the Motherboard Software About the Software DVD-ROM/CD-ROM The support software DVD-ROM/CD-ROM that is included in the motherboard package contains all the drivers and utility programs needed to properly run the bundled products. Below you can find a brief description of each software program, and the location for your motherboard version. More information on some programs is available in a README file, located in the same directory as the software.
38 Drivers Tab Click the Setup button to run the software installation program. Select from the menu which software you want to install. Setup Browse CD The Browse CD button is the standard Windows command that allows you to open Windows Explorer and show the contents of the support disk. Before installing the software from Windows Explorer, look for a file named README.TXT or something similar. This file may contain important information to help you install the software correctly.
39 2. Click Next. The following screen appears: 3. Check the box next to the items you want to install. The default options are recommended. 4. Click Next run the Installation Wizard. An item installation screen appears: 5. Follow the instructions on the screen to install the items. Drivers and software are automatically installed in sequence. Follow the onscreen instructions, confirm commands and allow the computer to restart a few times to complete the installation.
40 Windows Vista/7 will appear below UAC (User Account Control) message after the system restart. You must select “Allow” to install the next driver. Continue this process to complete the drivers installation. Manual Installation Insert the disk in the DVD-ROM/CD-ROM drive and locate the PATH.DOC file in the root directory. This file contains the information needed to locate the drivers for your motherboard.
41 Chapter 5 Trouble Shooting Start up problems during assembly After assembling the PC for the first time you may experience some start up problems. Before calling for technical support or returning for warranty, this chapter may help to address some of the common questions using some basic troubleshooting tips. a) System does not power up and the fans are not running. 1.Disassemble the PC to remove the VGA adaptor card, DDR memory, LAN, USB and other peripherals including keyboard and mouse.
42 c) The PC suddenly shuts down while booting up. 1. The CPU may experience overheating so it will shutdown to protect itself. Ensure the CPU fan is working properly. 2. From the BIOS setting, try to disable the Smartfan function to let the fan run at default speed. Doing a Load Optimised Default will also disable the Smartfan. Start up problems after prolong use After a prolong period of use your PC may experience start up problems again.
If fail, contact RMA CLR CMOS and restart. Yes Halt at POST screenΛ Yes Check if monitor has display Yes Check if Power Supply Unit (PSU) is working Power Bu on is pressed but PC fails to start. - need to CLRCMOS. HDD problem.
44 Memo Trouble Shooting