Specifications

61
Hydra Core Technology Support
Chapter 6
Hydra Core Technology Support
This motherboard supports the Hydra Core Technology that allows you to install
multi-graphics processing units (GPU) graphics cards, which support Hydra Core A-
Mode, N-Mode, X-Mode. Follow the installation procedures in this section.
The default setting of Hydra Core
Technology is Enabled, if you want to enable the
ATI CrossFireX
TM
Technology, please change it to Disabled.
Requirements
1 Two or three identical or non-identical graphic cards are needed the setup
of 2-Way / 3-Way configuration. .
2 Download the latest driver from the Lucid website (www.lucidlogix.com).
3 Make sure that your power supply unit (PSU) can provide at least the
minimum power required by your system.
Installing graphics cards
1. Insert graphics cards into the PCIEX16 slots. Make sure that the card is properly
seated on the slot.
For 2-Way configuration, install two graphic cards on PCIEX16_1 & PCIEX16_2.
(x16, x16)
A. A-Mode Performance(Dual identical ATI graphic cards)