Specifications

46
Using BIOS
CAS#Latency(tcl) (9)
This item determines the operation of DDR SDRAM memory CAS(colulmn address
strobe). It is recommanded that you leave this item at the default value. The 2T
setting requires faster memory that specifically supports this mode.
Row Precharge Time(tRP) (9)
This item specifies Row precharge to Active or Auto-Refresh of the same bank.
RAS# to CAS# Delay(tRD) (9)
This item specifies the RAS# to CAS# delay to Rd/Wr command to the same bank.
RAS# Active Time(tRAS) (24)
This item specifies the RAS# active time.
Press <Esc> to return to the M.I.B X menu page.
Auto Detect DIMM/PCI Clk (Enabled)
When this item is enabled, BIOS will disable the clock signal of free DIMM/PCI slots.
Spread Spectrum (Enabled)
If you enable spread spectrum, it can significantly reduce the EMI (Electro-Magnetic
Interference) generated by the system.
XPM Support By (SPD)
This item allows users to set the XPM Support.
PCH Voltage (1.08V)
This item allows users to adjust the current PCH voltage.
PLL Voltage (1.83V)
This item allows users to adjust the current PLL voltage.
DIMM Voltage (Disabled)
This item allows users to adjust the DIMM voltage.
CPU Voltage (Disabled)
This item allows users to adjust the CPU voltage.
IMC Voltage (Disabled)
This item allows users to adjust the IMC voltage.
Intel(R) Core(TM) CPU i5-2400 @ 3.10 GHz
This is display-only field and displays the information of the CPU installed in your
computer.
Processor Speed (3100MHz)
This item shows the CPU speed.
Total Memory (1024MB(DDR3 1333))
This item shows the total momery of DDR3.
VDIMM (1.512V)
This item displays the current VDIMM voltage.