Specifications

39
Using BIOS
USB 3.0 Controller (Enabled)
Use this item to enable or disable USB 3.0 controller. We recommand users keep the
default value. Disabling it might cause the USB devices not to work properly.
Legacy USB Support (Enabled)
Use this item to enable or disable support for legacy USB devices.
Press <Esc> to return to the Advanced Menu page.
Super IO Configuration
Use this item to show the information of Super IO configuration.
Super IO Chip (IT8728)
This item shows the information of the super IO chip.
+/- : Value
Enter : Select


:Select Screen
:Select Item
Super IO Configuration
Super IO Chip IT8728
Serial Port 0 Configutation
Temp. to 80-Port [Disabled]
F1:General Help
Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc.
F2:Previous Value
F3:Optimized Defaults
F4:Save & Exit
ESC:Exit
Version 2.02.1205. Copyright (C) 2010, American Megatrends, Inc.
Set Parameters of Serial Port
0 (COMA)



Main Advanced Chipset M.I.B X Boot Security Save & Exit
Serial Port 0 Configuration
This item shows the information of the super IO chip.
+/- : Value
Enter : Select


:Select Screen
:Select Item
Serial Port 0 Configuration
Serial Port [Enabled]
Device Settings IO=3F 8h; IRQ=4;
F1:General Help
Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc.
F2:Previous Value
F3:Optimized Defaults
F4:Save & Exit
ESC:Exit
Version 2.02.1205. Copyright (C) 2010, American Megatrends, Inc.
Enable or Disable Serial Port
(COM)
Change Settings [Auto]
Main Advanced Chipset M.I.B X Boot Security Save & Exit
Serial Port
Enabled
Disabled