Specifications

38
Using BIOS
All USB Devices (Enabled)
Use this item to enable or disable all USB devices.
+/- : Value
Enter : Select


:Select Screen
:Select Item
USB Configuration
All USB Devices [Enabled]
USB 3.0 Controller [Enabled]
F1:General Help
Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc.
F2:Previous Value
F3:Optimized Defaults
F4:Save & Exit
ESC:Exit
Version 2.02.1205. Copyright (C) 2010, American Megatrends, Inc.
Enabled/Disabled All USB
Devices
Legacy USB Support [Enabled]
Main Advanced Chipset M.I.B X Boot Security Save & Exit
All USB Devices
Enabled
Disabled
USB Configuration
Use this item to show the information of USB configuration.
+/- : Value
Enter : Select


:Select Screen
:Select Item
USB Configuration
All USB Devices [Enabled]
USB 3.0 Controller [Enabled]
F1:General Help
Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc.
F2:Previous Value
F3:Optimized Defaults
F4:Save & Exit
ESC:Exit
Version 2.02.1205. Copyright (C) 2010, American Megatrends, Inc.
Enabled/Disabled All USB
Devices
Legacy USB Support [Enabled]
Main Advanced Chipset M.I.B X Boot Security Save & Exit
SATA Port 0~5
This motherboard supports six SATA channel and each channel allows one SATA
device to be installed. Use these items to configure each device on the SATA channel.
eSATA 6 Gb/s Controller Mode (AHIC Mode)
Use this item to select eSATA 6 Gb/s controller mode.
Press <Esc> to return to the Advanced Menu page.