Datasheet

27
Using BIOS
For the purpose of better product maintenance, the manufacture reserves the
right to change the BIOS items presented in this manual. The BIOS setup
screens shown in this chapter are for reference only and may differ from the
actual BIOS. Please visit the manufacture’s website for updated manual.
Date (www mm:dd:yy) Mon 04/28/2008
Standard CMOS Setup
This option displays basic information about your system.
f
SATA1 Not Detected
SATA2 Not Detected
SATA3 Not Detected
SATA4 Not Detected
SATA5 Not Detected
SATA6 Not Detected
Help Item
f
CMOS Setup Utility -- Copyright (C) 1985-2008, American Megatrends, Inc.
Time (hh:mm:ss) 00:25:44
User [Enter], [TAB]
or [SHIFT-TAB] to
select a field.
Use [+] or [-] to
configure system Date.
Standard CMOS Setup
IDE BusMaster Enabled
: Move
F10: Save ESC: Exit
Enter : Select
+/-/: Value
F9: Load Default settings
F1: General Help
mn
< >
f
f
f
f
f
f
Date & Time
The Date and Time items show the current date and time on the computer. If you are
running a Windows OS, these items are automatically updated whenever you make
changes to the Windows Date and Time Properties utility.
SATA1~6/PATA MASTER/SLAVE
f
CMOS SETUP UTILITY - Copyright (C) 1985-2008, American Megatrends, Inc.
SATA1
Type Auto
LBA/Large Mode Auto
Block (Multi-Sector Transfer Auto
PIO Mode Auto
DMA Mode Auto
S.M.A.R.T. Auto
32Bit Data Transfer Enabled
Help Item
Select the type
of device connected
to the system.
Device : Not Detected
: Move
F10: Save ESC: Exit
Enter : Select
+/-/: Value
F9: Load Default settings
F1: General Help
mn
< >
This motherboard supports six SATA channels and each channel allows one SATA
device to be installed. Use these items to configure each device on the SATA channel.
SATA1
PATA MASTER Not Detected
PATA SLAVE Not Detected