Specifications

34
Introducing the Motherboard
Integrated Peripherals
This page sets up some parameters for peripheral devices connected to the system.
CMOS Setup Utility - Copyright (C) 1985-2008, American Megatrends, Inc.
Integrated Peripherals
Onboard SATA Mode Enhanced
Onboard LAN Function Enabled
Onboard LAN Boot ROM Disabled
Onboard AUDIO Function Enabled
Serial Port1 Address 3F8&IRQ4
Serial Port2 Address 2F8/IRQ3
OnBoard CIR Port Disabled
Parallel Port Address 378
Parallel Port Mode Normal
Parallel Port IRQ IRQ7
USB Functions Enabled
Legacy USB Support Enabled
Help Item
mnlk
: Move
F10: Save ESC: Exit
Enter : Select
+/-/: Value
F9: Load Default Settings
F1: General Help
Onboard SATA Mode (Enhanced)
Use this item to select the mode of the Serial ATA.
OnBoard LAN Function (Enabled)
Use this item to enable or disable the onboard LAN function.
Serial Port1/2 Address (3F8/IRQ4 2F8/IRQ3)
OnBoard AUDIO Function (Enabled)
Use this item to enable or disable the onboard Audio function.
Use this item to enable or disable the onboard COM1/2 serial port, and to assign a
port address.
Options
Disabled
Compatible
Enhanced
OnBoard CIR Port (Disabled)
Use this item to enable or disable the OnBoard CIR Port.
Parallel Port Address (378)
Use this item to enable or disable the onboard Parallel port, and to assign a port
address.
Parallel Port Mode (Normal)
Use this item to select the parallel port mode. You can select Normal (Standard
Parallel Port), ECP (Extended Capabilities Port), EPP (Enhanced Parallel Port), or
BPP (Bi-Directional Parallel Port).
OnBoard LAN Boot ROM (Disabled)
Use this item to enable or disable the booting from the onboard LAN or a network
add-in card with a remote boot ROM installed.