Datasheet

42
Using BIOS
Press <Esc> to return to the Integrated Peripherals page.
PCI Master (OFF)
When set to Off, any PCI device set as the Master will not power on the system.
Resume by PCI PME(Enabled)
Use this item to enable PCI activity to wakeup the system from a power saving mode.
Resume by Ring (Disabled)
Use this item to enable modem activity to wakeup the system from a power saving mode.
RTC Alarm Resume (Disabled)
When set to Enabled, additional fields become available and you can set the date (day of the
month), hour, minute and second to turn on your system. When set to 0 (zero) for the day of the
month, the alarm will power on your system every day at the specified time.
Set any IRQ to Enabled to allow activity at the IRQ to wake up the system from a power saving
mode.
IRQs Activity Monitoring (Press Enter)
This screen enables you to set IRQs that will resume the system from a power saving mode.

Press <Esc> to return to the IRQ/Event Activity Detect page.
Phoenix-AwardBIOS CMOS Setup Utility
IRQs Activity Monitoring
Primary INTR [ON]
IRQ3 (COM2) [Disabled]
IRQ4 (COM1) [Enabled]
IRQ5 (LPT2) [Enabled]
IRQ6 (Floppy Disk) [Enabled]
IRQ7 (LPT1) [Enabled]
IRQ8 (RTC Alarm) [Disabled]
IRQ9 (IRQ2 Redir) [Disabled]
IRQ10 (Reserved) [Disabled]
IRQ11 (Reserved) [Disabled]
IRQ12 (PS/2 Mouse) [Enabled]
IRQ13 (Coprocessor) [Enabled]
IRQ14 (Hard Disk) [Enabled]
IRQ15 (Reserved) [Disabled]
Item Help

Menu Level

F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults
: Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1: General Help