Datasheet

32
Using BIOS
APIC Mode (Enabled)
This item allows you to enable or disable the APIC (Advanced Programmable Interrupt
Controller) mode. APIC provides symmetric multi-processing (SMP) for systems, allowing
support for up to 60 processors.
OS Select For DRAM > 64MB (Non-OS2)
This item is only required if you have installed more than 64 MB of memory and you are
running the OS/2 operating system. Otherwise, leave this item at the default.
HDD S.M.A.R.T Capability [Disabled]
The S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) system is a diag-
nostics technology that monitors and predicts device performance S.M.A.R.T. software
resides on both the disk drive and the host computer.
The disk drive software monitors the internal performance of the motors, media, heads and
electronics of the drive. The host software monitors the overall reliability status of the
drive. If a device failure is predicted, the host software, through the
Client WORKS S.M.A.R.T applet, warns the user of the impending condition and advises
appropriate action to protect the data.
Video BIOS Shadow (Enabled)
This item determines whether the BIOS will be copied to RAM for faster execution.
Small Logo (EPA) Show [Disabled]
Enables or disables the display of the EPA logo during boot.