Datasheet

30
Using BIOS
Advanced BIOS Features
This option defines advanced information about your system.
BIOS Protect (Disabled)
This item enables or disables the BIOS protect function
ATA 66/100 IDE Cable Msg (Enabled)
Enables or disables the ATA 66/100 IDE Cable Msg. This message will appear during reboot
when you use 40-pin cable on your 66/100 hard disks.
Hard Disk Boot Priority (Press Enter)
Scroll to this item and press <Enter> to view the following screen. Users can change the
boot sequence under this menu.
1. Pri.Master:
2. Pri.Slave:
3. Sec. Master:
4. Sec. Slave:
5. USBHDD0:
6. USBHDD1:
7. USBHDD2:
8. Bootable Add-in Cards
Item Help

Menu Level
Phoenix-AwardBIOS CMOS Setup Utility
Hard Disk Boot Priority

: Move PU/PD+/-/:Change Priority F10:Save ESC:Exit
Use < > or < >
to select a device, then
press <+> to move it
up, or <-> to move it
down the list. Press
<ESC> to exit this
menu.

X
X
BIOS Protect [Disabled]
ATA 66/100 IDE Cable Msg. [Enabled]
Hard Disk Boot Priority [Press Enter]
CPU Internal Cache [Enabled]
External Cache [Enabled]
CPU L2 Cache ECC Checking [Enabled]
Quick Power On Self Test [Enabled]
First Boot Device [Floppy]
Second Boot Device [Hard Disk]
Third Boot Device [CDROM]
Boot Other Device [Enabled]
Swap Floppy Drive [Disabled]
Boot Up Floppy Seek [Disabled]
Boot Up NumLock Status [On]
Typematic Rate Setting [Disabled]
Typematic Rate (Chars/Sec0 6
Typematic Delay (Msec) 250
Security Option [Setup]
APIC Mode [Enabled]
OS Select For DRAM > 64MB [Non-OS2]
HDD S.M.A.R.T. Capability [Disabled]
VIdeo BIOS Shadow [Enabled]
Small Logo(EPA) Show [Disabled]
Item Help
Menu Level
Phoenix-AwardBIOS CMOS Setup Utility
Advanced BIOS Features

F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults
: Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1: General Help