Specifications

Using BIOS

Boot Up Numlock Status (On)

This item defines if the keyboard Num Lock key is active when your system is

started.

APIC Mode (Enabled)

This item allows you to enable or disable the APCI (Advanced Programmable Inter-

rupt Controller) mode.

APIC provides symmetric multi-processing (SMP) for sys-

tems, allowing support for up to 60 processors.

1st/2nd3rd Boot Device (Hard Drive/CD/DVD/Removable Dev.)

Use this item to determine the device order the computer used to look for an

operating system to load at start-up time. The devices showed here will be different

depending on the exact devices installed on your motherboard.

Advanced Chipset Setup

This page sets up more advanced information about your system. Handle this page

with caution. Any changes can affect the operation of your computer.

Advanced Chipset Setup

Memory Remap Feature Enabled

HPET Enabled

Help Item

ENABLE: Allow

remapping of

overlapped PCI memory

above the total

physical memory.

DISABLE: Do not allow

remapping of memory.

Press <Esc> to return to the main menu setting page.

Boot Other Device (Yes)

Press <Esc> to return to the main menu setting page.

When enabled, the system searches all other possible locations for an operating

system if it fails to find one in the devices specified under the First, Second and Third

boot devices.

: Move F10: Save ESC: Exit

+/-/: Value

Enter : Select

F9: Load Default Settings

F1:General Help

mnlk

Memory Remap Feature (Enabled)

This item allows users to enable or disable memory hole remapping.

HPET (Enabled)

This item enables or disables HPET (High Precision Event Timer) support.

ECS eJIFFY Function (Disabled)

Use this item to enable or disable the ECS eJIFFY Function. eJIFFY is ECS unique

software program for the quick access to the internet without entering O.S. Please

refer to Chapter 5 to know more about eJIFFY