User manual

English

Once the steps above have been completed, please

connect the peripherals such as the keyboard,

mouse, monitor, etc. Then, connect the power and

turn on the system. Please install all the required

software.

Step 8: Connecting ports on the case:

Please install all peripheral devices.

8-1. Keyboard connection

To prevent component damage, do not power up the system until the

installation is complete.

8-2. Printer connection

8-3. Monitor connection 8-4. Speaker connection

8-5. Power connection 8-6. Mouse connection

The sequence of installation may differ depending on the type of case and

devices used.

BIOS Navigation Keys

Scrolls through the items on a menu

Using BIOS

The BIOS (Basic Input and Output System) Setup Utility displays the system’s

configuration status and provides you options to set system parameters. When

you power on the system, BIOS enters the Power-On Self Test (POST) routines,

please press <DEL> or F2 to enter setup. When powering on for the first time, the

POST screen may show a “CMOS Settings Wrong” message. Please enter BIOS and

choose “Load Default Settings” to reset the default CMOS values. (Changes to

system hardware such as different CPU, memories, etc. may also trigger this

message.)

KEY

+/- Modifies the selected field’s values

F2 Previous Value

F3 Optimized Defaults

F1 General Help

ESC Exits the current menu

Enter Select

F4 Save & Exit

mnlk

KEY FUNCTION