User manual

BAT-T USER MANUAL
39
Chapter 3
Parallel Port 1 Configuration
Scroll to this item and press <Enter> and view the following screen.
Parallel Port (Enabled)
This item allows you to enable or disable serial port.
Device Settings (IO=378h; IRQ=5)
This item shows the information of the device settings.
Change Settings (Auto)
Use this item to change device settings.
+/- : Change Opt.
Enter : Select


:Select Screen
:Select Item
Parallel Port Configuration
Parallel Port [Enabled]
Device Settings IO=378h; IRQ=5;
Change Settings [Auto]
Device Mode [Standard Parallet...]
F1:General Help
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
F2:Previous Values
F3:Optimized Defaults
F4:Save & Exit
ESC:Exit
Version 2.12.1236. Copyright (C) 2012 American Megatrends, Inc.
Enable or Disable Parallel
Port (LPT/LPTE)
Main Advanced Chipset M.I.B III Security Boot Exit
Device Mode (Standard Parallet...)
This item is used for Printer port mode selection, it can be set to Standard Parallel
Port Mode (SPP) or EPP Mode.
Press <Esc> to return to the Super IO Configuration page.