User manual

BAT-T USER MANUAL
37
Chapter 3


Super IO Configuration
Use this item to show the information of Super IO configuration.
+/- : Change Opt.
Enter : Select


:Select Screen
:Select Item
Super IO Configuration
Super IO Chip IT8728E-FX
Serial Port 1 Configuration
Serial Port 2 Configuration
Parallel Port 1 Configuration
F1:General Help
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
F2:Previous Values
F3:Optimized Defaults
F4:Save & Exit
ESC:Exit
Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc.
Set Parameters of Serial Port
1 (COMA)

Serial Port 1 Configuration
Scroll to this item and press <Enter> and view the following screen.
Serial Port (Enabled)
This item allows you to enable or disable serial port.
Device Settings (IO=3F8h; IRQ=4)
This item shows the information of the device settings.
Change Settings (Auto)
Use this item to change device settings.
+/- : Change Opt.
Enter : Select


:Select Screen
:Select Item
Serial Port 1 Configuration
Serial Port [Enabled]
Device Settings IO=3F8h; IRQ=4;
Change Settings [Auto]
F1:General Help
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
F2:Previous Values
F3:Optimized Defaults
F4:Save & Exit
ESC:Exit
Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc.
Enable or Disable Serial Port
(COM)






Main Advanced Chipset M.I.B III Security Boot Exit
Main Advanced Chipset M.I.B III Security Boot Exit
Press <Esc> to return to the Super IO Configuration page.
Super IO Chip (IT8728E-FX)
This item shows the information of the super IO chip.