Specifications

2
Introducing the Motherboard
Feature
Processor
HyperTransport
TM
Technology is a point-to-point link between two devices, it
enables integrated circuits to exchange information at much higher speeds than
currently available interconnect technologies.
• Accommodates socket AM3+ for AMD AM3+ FX
TM
/ Phenom
TM
II /Athlon
TM
II/Sempron
TM
100 Series processors
• Supports 125W Phenom
TM
II X6 processors
• Supports HyperTransport
TM
(HT) 3.0 interface speeds
This motherboard uses a Socket AM3+ that carries the following features:
AMD 760G
(RS780L)(NB)
• One x4 A-Link Express II interface (PCI Express 2.0
compliant) for connection to an AMD Southbridge
• Supports one PCI Express x16 for Graphics Interface,
fully compliant to the PCI Express Base Specification
revision 2.0
• Proven Radeon
TM
graphics powering DirectX
®
10
• Enhanced Digital Display integration
• Fully ACPI 2.0, OnNow, and IAPC (Instantly Available
PC) power management
• Single chip solution in 55nm, 1.1 V CMOS technology
The AMD 760G (RS780L) Northbridge (NB) and SB710 Southbridge (SB)
chipsets are based on an innovative and scalable architecture with proven reli-
ability and performance.
Chipset
Memory
• Supports Dual-Channel DDR3 up to 1866 with AM3+ CPU
• Supports Dual-Channel DDR3 1333 / 1066 with AM3 CPU
• Accommodates two unbuffered DIMMs
• Up to 8 GB per DIMM with maximum memory size up to 16 GB
Audio
The onboard Audio provides the following features:
• ADCs support 44.1K/48K/88.2K/96K/192KHz sample rate
• Power Support: Digital: 3.3V; Analog: 5.0V
• 5.1 Channel High Definition Audio Codec
• Exceeds Microsoft Windows Logo Program (WLP) Requirements
SB710 (SB)
• Compliant with PCI 2.3 specification at 33 MHz
• Supports six Serial ATA devices which speeds up to 3.0
Gb/s
• Integrated USB 2.0 Host Controller supporting up to eight
USB 2.0 ports
• Integrated IDE controller supports Ultra ATA 133/100/66/
33 modes
• Supports integrated RAID0, RAID1, and RAID10 (requires
use of 4 or more SATA ports) functionalities across all 4
ports