Specifications

40
Using BIOS
M . I . B . III (MB Intelligent BIOS III)
This page enables you to set the clock speed and system bus for your system. The
clock speed and system bus are determined by the kind of processor you have installed
in your system.
Memory Configuration

Scroll to this item and press <Enter> to view the memory configuration screen.
AMD Phenom (tm) II x3 720 Processor
Speed: 2800MHz, NB Clk: 2000MHz
Physical Count :1
Logical Count :3
Current CPU Frequency 2800MHz
Current CPU Voltage 1.2500v
CMOS Setup Utility - Copyright (C) 1985-2007, American Megatrends, Inc.
M . I . B . III (MB Intelligent BIOS III)
Help Item
Memory Configuration Press Enter
CPU Unclock Disabled
CoreX control Disabled
CPU Frequency Ctrl : Auto
HT Frequency Auto
Spread Spectrum Enabled
CPU Over-clocking Func.: Disabled
Auto Detect DIMM/PCI C1K Enabled
CPU Voltage Disabled
HT Voltage Disabled
NB Voltage Disabled
DIMM Voltage 1.6v
Options

< >
: Move
F10: Save ESC: Exit
Enter : Select
+/-/: Value
F9: Default settings
F1: General Help

CMOS Setup Utility - Copyright (C) 1985-2007, American Megatrends, Inc.
M . I . B . III (MB Intelligent BIOS III)
Help Item
Memory Configuration
DRAM Frequency Auto
DRAM Timing Mode Auto
Bank Interleaving Auto
Channel Interleaving XOR of Address bits
Memory CLK : N/A, 667 MHz
CAS Latency (Tcl) : N/A, 9 CLK
RAS/CAS Delay (Trcd) : N/A, 9 CLK
Row Precharge Time (Trp) : N/A, 9 CLK
Min Active RAS (Tras) : N/A, 24 CLK
RAS/RAS Delay (Trrd) : N/A, 4 CLK
Row Cycle (Trc) : N/A, 33 CLK
Options

< >
: Move
F10: Save ESC: Exit
Enter : Select +/-/: Value
F9: Default settings
F1: General Help
Auto
Limit
Manual