Datasheet

37
Using BIOS
PCI / PnP Setup
This page sets up some parameters for devices installed on the PCI bus and those
utilizing the system plug and play capability.
Help Item
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
PCI / PnP Setup
F10: Save ESC: Exit+/-/: Value
Enter : Select
F9: Optimized Defaults
F1:General Help
: Move
mnlk
Allocate IRQ to PCI VGA Yes
Press <Esc> to return to the main menu setting page.
Allocate IRQ to PCI VGA (Yes)
If this item is enabled, an IRQ will be assigned to the PCI VGA graphics system. You
set this value to No to free up an IRQ.
Options
Yes: Assigns IRQ to PCI
VGA card if card requests
IRQ.
No: Does not assign IRQ
to PCI VGA card even if
card requests an IRQ.