Specifications

Using BIOS

This page enables you to set the clock speed and system bus for your system. The

clock speed and system bus are determined by the kind of processor you have

installed in your system.

M.I.B.III (MB Intelligent BIOS III) Menu

This Option Allows User to

select different Memory Clock.

Default value is 400Mhz.

Memory Clock [Auto]

Memory Mode [Auto]

Memory Clock DCT0 is : (DDR-1333/667Mhz)

Memory Clock DCT1 is : None

CAS# Latency (tCL) 9 CLK

RAS# to CAS# Delay (tRCD) 9 CLK

Row Precharge Time (tRP) 9 CLK

RAS# Active Time (tRAS) 24 CLK

Main Advanced Chipset M.I.B.III Boot Security Save & Exit

Memory Clock (Auto)

This item is used to set the memory clock.

Press <Esc> to return to the M.I.B.III Menu page.

Memory Mode (Auto)

This item is used to set the memory Mode.

RAS# to CAS# Delay(tRD) (9CLK)

This item specifies the RAS# to CAS# delay to Rd/Wr command to the same bank.

RAS# Active Time(tRAS) (24CLK)

This item specifies the RAS# active time.

Row Precharge Time(tRP) (9CLK)

This item specifies Row precharge to Active or Auto-Refresh of the same bank.

CAS#Latency(tcl) (9CLK)

This item determines the operation of DDR SDRAM memory CAS(colulmn address

strobe). It is recommanded that you leave this item at the default value. The 2T

setting requires faster memory that specifically supports this mode.

+/- : Change Opt.

: Select Screen

/Click: Select Item

F1: General Help

F2: Previous Values

F3: Optimized Defaults

F4: Save & Exit

ESC/Right Click: Exit

Enter/Dbl Click : Select

Memory Clock DCT0 is (DDR-1333/667Mhz)

This item shows current memory clock of DCT0.

Memory Clock DCT1 is (None)

This item shows current memory clock of DCT1.