Specifications

36
Using BIOS
Suspend mode (S3)
After the selected period of system inactivity, all devices expect the CPU shut off.
APM Power Management (Enabled)
Use this item to enable or disable a power management scheme. If you enable power
management, you can use the items below to set the power management operation.
Only APM is supported.
Repost Video on S3 Resume (No)
If STR mode or Auto mode is selected, this item allows you to enable/disable this function.
Legacy USB Support (Enabled)
This item allows you to enable or disable Legacy USB support.
USB 2.0 Controller (Enabled)
This item allows you to enable or disable USB 2.0 Controller.
AUDIO Device (Enabled)
Enables and disables the Audio device.
LAN Device (Enabled)
Enables and disables the onboard LAN.
LAN Boot ROM Support (Disabled)
This item allows you to enable or disable the onboard LAN Boot ROM function.
1394 Device (Enabled)
Enabled this item if you plan to use 1394 device.
Press <Esc> to return to the main menu setting page.
USB Function (Enabled)
This item allows you to enable or disable USB function.
F9: Optimized Defaults
F8:Best Performance Settings
F7:Previous Values
: Move
F10: Save
F1: General help

+/-/: Value
Enter : Select
ESC: Exit
Power Mangement Setup
This page sets up some parameters for system power management operation.
Select the ACPI state used
for System Suspend.
Help Menu
CMOS Setup Utility - Copyright (C) 1985-2004, American Megatrends, Inc.
Power Management Features
Suspend mode [S3]
APM Power Management [Enabled]
Repost Video on S3 Resume [No]
Suspend Time Out [Disbaled]
Power Button Mode [On/Off]
Restore on AC Power Loss [Power Off]
PS/2 Keyboard Wakeup [Disabled]
PS/2 Mouse Wakeup [Disabled]
Resume On Ring [Disabled]
Resume On LAN [Disabled]
Resume On PME# [Enabled]
USB Device Wakeup From S3 [Disabled]
Resume On RTC Alarm [Disabled]