Specifications

34
Using BIOS
Super IO Configuration (Press Enter)
Scroll to this item and press <Enter> to view the following screen:

Onboard Floppy Controller (Enabled)
Use this item to enable or disable the onboard floppy disk drive interface.
Serial Port1/2 Address (3F8/IRQ4/2F8/IRQ3)
Use this item to enable or disable the onboard COM1/2 serial port, and to assign a port
address.
Serial Port2 Mode (Normal)
It Serial Port 2 Address is not disabled, it allows youy to set the Serial Port 2 Mode.
Parallel Port Address (378)
Use this item to enable or disable the onboard Parallel port, and to assign a port address.
Parallel Port Mode(Normal)
Use this item to select the parallel port mode.
Parallel Port IRQ (IRQ7)
Use this item to assign IRQ to the parallel port.
Press <Esc> to return to the advanced setup page.
Allows BIOS to Enable or
Disable Floppy Controller.
Help Menu
CMOS Setup Utility - Copyright (C) 1985-2004, American Megatrends, Inc.
SuperIO Configuration
OnBoard Floppy Controller [Enabled]
Serial Port1 Address [3FB/IRQ4]
Serial Port2 Address [2FB/IRQ3]
Serial Port2 Mode [Normal]
Parallel Port Address [378]
Parallel Port Mode [Normal]
Parallel Port IRQ [IRQ7]
F9: Optimized Defaults
F8:Best Performance Settings
F7:Previous Values
: Move
F10: Save
F1: General help

+/-/: Value
Enter : Select
ESC: Exit