Specifications

Installing the Motherboard

Connecting Case Components

After you have installed the motherboard into a case, you can begin con-

necting the motherboard components. Refer to the following:

1 Connect the CPU cooling fan cable to CPU_FAN.

2 Connect the case cooling fan connector to SYS_FAN.

3 Connect the power fan connector to PWR_FAN.

3 Connect the case speaker cable to SPK1.

4 Connect the case switches and indicator LEDs to the F_PANEL. If there are

3 pins in the case LED cable, connect to SJ1/LSJ1.

6 Connect the standard power supply connector to ATX1.

7 Connect the auxiliary case power supply connector to ATX12V.

Connecting 20/24-pin power cable

Users please note that the 20-pin and 24-pin power cables can both be con-

nected to the ATX1 connector. With the 20-pin power cable, just align the 20-

pin power cable with the pin 1 of the ATX1 connector. However, using 20-pin

power cable may cause the system to become unbootable or unstable because of

insufficient electricity.

20-pin power cable

24-pin power cable

Users please note that when installing 20-

pin power cable, the latche of power cable

falls on the left side of the ATX1 connector

latch, just as the picture shows.

Users please note that when installing 24-

pin power cable, the latches of power cable

and the ATX1 match perfectly.