Setup guide
32
Using BIOS
Press <Esc> to return to the main menu setting page.
Resume from USB Device (Disabled)
This option allows the activity of the USB devices to wake up the system from S3 sleep
state.
ACPI Enhanced Efficiency (Disabled)
This item allows you to enable or disable ACPI Enhanced Efficiency function.
Primary Graphics Adapter (PCI)
This item helps you select which graphics controller to use as the primary boot device.
Allocate IRQ to PCI VGA (Yes)
If this item is enabled, an IRQ will be assigned to the PCI VGA graphics system. You set this
value to No to free up an IRQ.
PCI IDE BusMaster (Enabled)
This item enables or disables the DMA under DOS mode. We recommend you to leave this
item at the default value.
Press <Esc> to return to the main menu setting page.
PCI / Plug and Play Setup Page
.
This page sets up some parameters for devices installed on the PCI bus and those utilizing
the system plug and play capability.
CMOS SETUP UTILITY – Copyright (C) 1985-2003, American Megatrends, Inc.
PCI / Plug and Play Setup
Help Item
Primary Graphics Adapter PCI
Allocate IRQ to PCI VGA Yes
PCI IDE BusMaster Enabled
: Move Enter: Select +/-: Value F10: Save ESC: Exit
F1: General Help F9: Optimized Defaults
Options
PCI
PCI Express Card