Setup guide
31
Using BIOS
Press <Esc> to return to the main menu setting page.
Onboard LAN Boot ROM (Disabled)
Use this item to enable or disable the booting from the onboard LAN or a network add-in
card with a remote boot ROM installed.
OnBoard USB Function (Enabled)
Enable this item if you plan to use the USB ports on this motherboard.
USB Function For DOS (Disabled)
Enable this item if you plan to use the USB ports on this motherboard in a DOS environ-
ment.
ACPI Aware O/S (Yes)
This itme supports ACPI (Advanced Configuraion and Power Management Interface). Use
this item to enable or disable the ACPI feature.
Power Management (Enabled)
Use this item to enable or disable a power management scheme. If you enable power
management, you can use this item below to set the power management operation. Both
APM and ACPI are supported.
Suspend Time Out (Disabled)
This item sets up the timeout for Suspend mode in minutes. If the time selected passes
without any system activity, the computer will enter power-saving Suspend mode.
Resume on RTC Alarm (Disabled)
The system can be turned off with a software command. If you enable this item, the
systemcan automatically resume at a fixed time based on the system’s RTC (realtime
clock).Use the items below this one to set the date and time of the wake-up alarm. You must
use an ATXpower supply in order to use this feature.
LAN/Ring Power On (Disabled)
The system can be turned off with a software command. If you enable this item, the system
can automatically resume if there is an incoming call on the Modem/Ring, or traffic on the
network adapter. You must use an ATX power supply in order to use this feature.
Power Management Setup Page
This page sets up some parameters for system power management operation.
CMOS SETUP UTILITY – Copyright (C) 1985-2003, American Megatrends, Inc.
Power Management Setup
ACPI Aware O/S
Power Management
Suspend Time Out
Resume on RTC Alarm
LAN/Ring Power On
Resume From USB Device
ACPI Enhanced Efficiency
Help Item
Enable/Disable
ACPI support for Operating
System
ENABLE: If OS supports
ACPI
DISABLE: If OS does not
support ACPI
: Move Enter: Select +/-: Value F10: Save ESC: Exit
F1: General Help F9: Optimized Defaults
Yes
Enabled
Disabled
Disabled
Disabled
Disabled
Disabled