Setup guide

9
Installing the Motherboard
Checking Jumper Settings
The following illustration shows the location of the motherboard jumpers. Pin 1 is labeled.
Jumper Settings
Jumper
Type
Description
Setting (default)
CLR_CMOS 3-pin
CLEAR CMOS
1-2: NORMAL
2-3: Clearing
Before clearing the CMOS,
make sure to turn the sys-
tem off.
3-pin BIOS PROTECT 1-2: DISABLE
2-3: ENABLE
BIOS_WP
1
CLR_CMOS
1
BIOS_WP