User's Guide

1. Do not disassemble or open, crush, bend or deform,
puncture, or shred.
2. Do not modify or remanufacture, attempt to insert
foreign objects into the battery, immerse or expose to
water or other liquids, or expose to excessive heat, fire,
or other hazard. Only use the battery in the system for
which it was specified.
3. Only use the battery with a charging system that has
been qualified with the system per this standard.
4. Use of an unqualified battery or charger may present a
risk of fire, explosion, leakage, or other hazard.
5. Do not short-circuit a battery or allow metallic or
conductive objects to contact the battery terminals.
6. Replace the battery only with another battery that has
been qualified with the system per CTIA Certification
Requirements for Battery System Compliance to IEEE
1625.
7. Use of an unqualified battery may present a risk of fire,
explosion, leakage, or other hazard.
8. Promptly dispose of used batteries in accordance with
local regulations.
9. Battery usage by children should be supervised.
10. Follow the explanation of a security implementation per
IEEE 1625 Clause 10.3.1.
11. Avoid dropping the host or battery. If the host or battery
is dropped, especially on a hard surface, and the end
user suspects damage, take it to a service center for
inspection.
12. Improper battery use may result in a fire, explosion,
leakage, or other hazard.
13. Storage and operating conditions, including temperature,
shall be specified.
14. This device is slave equipment, the device is not radar
detection and not ad-hoc operation in the DFS band.
CAUTION
BATTERIES CAN BE CHARGED BEST BETWEEN THE TEMPERATURES
OF 2°C,~45.0℃ AND DISCHARGED BETWEEN THE TEMPERATURES
OF 0℃,~60.0℃.