User Manual

20
Changing the volume
When a radio station is playing, to increase the volume turn the volume knob clock wise.
Storing a radio station in a preset
Preset on Radio (using Remote Control)
1. When a station is playing, press and hold one of the numbers (1-10) on the remote control.
2. Select a number to assign the station to (1-10).
When a station is playing, hold down one of the preset buttons (1-5) until the screen shows:
Assigned to
Preset #
* Where “#” is the number of the preset button you held down.
If you would like to program more than 5 preset i.e. 6-10. Press the shift key on the remote control then
press and hold the corresponding preset button until the screen shows Assigned to Preset 6 etc.
All of your presets are saved in internal memory in the event of a power outage.
(On some models of internet radio, as a factory default ‘P1’ or another button on the front panel of the
radio has a demo recording stored in the memory. To save a new station over the demo recording
simply follow the instructions above and your station will be saved over the demo recording.)
Playing a preset radio station
When your radio is powered on and connected to your Wi-Fi network, briefly press the preset button
(1-5) on the radio or shift and 6-10, or 1-10 on the remote control, for the station you want to listen to.
* Note, do not hold the button down - if you do then the station currently playing will overwrite the one
stored in the preset; *be careful*.
Should you record over a station in error, simply go back to the station you wish to save again and press
and hold the desired preset once you have returned to the desired station and the station is playing.