Owner`s manual

ECOWATER

S Y S T E M S

Troubleshooting (continued)

RESETTING TO FACTORY DEFAULTS

To reset the electronic controller to its factory default

for all settings (time, days between recharges, etc.):

1. Press the SELECT button and hold it until the dis-

play changes twice to show “CODE” and the flash-

ing model code.

FIG. 32

2. Press the á UP button (a few times, if necessary)

to display a flashing “SoS”.

3. Press the SELECT button, and the electronic con-

troller will restart.

4. Set the present time, days between recharges,

etc., as described on pages 10 & 11.

FIG. 28

Position markers

(valve in service)

CAM

MOTOR

Valve Cam

FIG. 29

Position Switch

SERVICE

Valve Cam

FIG. 30

BACKWASH

ASPIRATE

Position Switch

Valve Cam

FIG. 31

Position Switch

7. To return to the present time display, press the

SELECT button. If the model code was

changed, make all controller settings.

NOTE: If the electronic control is left in a diagnostic

display (or a flashing display when setting

times or hardness), present time automatically

returns if a button is not pressed within 4 min-

utes.