Owner`s manual

16
SYSTEM INFORMATION
Use these features to look up the following information
about the conditioner/refiner and its operations:
Model information (model number and software
version)
Water available (conditioned water ready for use)
Daily average water used
Water used today
Total water used (explained in Step 6, below)
Current water flow
Days powered up
Last recharge
Total recharges
To display one of these screens:
1. From any of the rolling status screens, press the
SELECT () button to display the Main menu.
2. Press the DOWN () button to scroll through the
menu options until System information is highlight-
ed (See Figure 49).
FIG. 49
FIG. 50
3. Press the SELECT () button to display the System
information menu (See Figure 50).
4. Press the DOWN () button to scroll through the
menu options until the desired option is highlighted
(See list at the top of this column).
5. Press the SELECT () button to display the desired
information screen (See Figures 51-59).
6. The Total water used screen (See Figure 55) shows
the volume of water used since it was last reset (it
works like the trip odometer in a car). To reset the
value to 0, press the RIGHT () button while this
screen is displayed.
7. When finished viewing an information screen, press
the SELECT () button. The display will go back to
the System information menu (Figure 50). It will also
exit automatically if no buttons are pressed for four
minutes.
8. Press the LEFT () button twice to return to the
rolling status screens.
FIG. 51
FIG. 52
FIG. 53
FIG. 54
FIG. 55
FIG. 56
FIG. 57
FIG. 58
FIG. 59
ECOWATER
SYSTEMS
Conditioner/Refiner Operation