Specifications

ECOWATER

SYST E MS

Faceplate Controller, Features/Options

Primary Menu, continued

Water Flow Rate: Enter Primary Menu. Press the (↑)or(↓) keypads until

cursor is next to Water Flow Rate. Press the SELECT/EXIT (↵ ) keypad.

When selected, this screen will show the water flow rate in gallons per min-

ute (GPM) or liters per minute (LPM) with the moving bar graph at the bot-

tom of the display.

Water Used Today: Enter Primary Menu. Press the (↑)or(↓) keypads until

cursor is next to Water Used Today. Press the SELECT/EXIT ( ↵ ) keypad

and the gallons/liters used since midnight will be shown in the display.

Average Water Use: Enter Primary Menu. Press the (↑)or(↓) keypads until

cursor is next to Average Water Use. Press the SELECT/EXIT ( ↵ ) keypad

and the average gallons/liters use each day will be shown in the display.

Soft W ater Meter: Enter Primary Menu. Press the (↑)or(↓) keypads until

cursor is next to Soft Water Meter. Press the SELECT/EXIT (↵) keypad.

This screen is similar to a trip odometer in that it will count the number of

gallons/liters through the system until it is reset. To reset back to zero press

the (↓) keypad.

Set Rolling Screen: Enter Primary Menu. Press the (↑)or(↓) keypads until

cursor is next to Set Rolling Screen. Press the SELECT/EXIT (↵) keypad.

This menu will disable the Normal Screen Views from scrolling and will show

only the screen that is most current.

Set 12/24 Hour Clock: Enter Primary Menu. Press the (↑)or(↓) keypads

until cursor is next to Set 12/24 Hour Clock. Press the SELECT/EXIT (↵ )

keypad. Moving the (↑)or(↓) keypads will change clock display from 12

hour (AM & PM) or 24 hour format.

Set Gallons/Liters: Enter Primary Menu. Press the (↑)or(↓) keypads until

cursor is next to Set Gallons/Liters. Press the SELECT/EXIT (↵) keypad.

Moving the (↑)or(↓) keypads will change displays to indicate water in gal-

lons or liters.

Set Grains/PPM: Enter Primary Menu. Press the (↑)or(↓) keypads until

cursor is next to Set Grains/PPM. Press the SELECT/EXIT (↵) keypad.

Change between diplaying hardness units in grains or parts per million

(PPM).

continued