User guide

Tangle the power cord on the pothook and do not scatter it besides the block

or hold it under the base, in case that robot would get impeded when it turns

back.

1.5m

0. 5m

There should not be any object at least 1.5 meter in front of the charging

block. Besides, anything with strong reflector is not supposed to stay ahead of

the infrared receiver. For example, ground glass, smooth ceramic vase and

so on. Other wise, the machine shall not detect the charging block.

● You need to charge the robot the first time it works. Put away the full-

charged battery for use to ensure it's performance.

● Charging duration should be around 3 hours.

● Charging is only allowed under the temperature between 0 and 45 degree

and extreme hot or cold would extend charging duration or even

cause damage to the battery.

To make sure the robot is working in saturation, we suggest you

to keep charging connected even though the charging indicator

lasts lighting. At the same time, the system would transfer to

weak current for supplementary charging.

According to actual ground situation, robot can keep working for

around 60 minutes after being charged full.

The capacity of battery, which is not used for long time, will get

certain decrease, so the use time can be shorten accordingly.

Tips:

Robot Charging

charging

status

charging

status

Indicator

flashing

Indicator

last

lighting

Please do not put the charging block near to the staircase to avoid

accidental cases.

Note:

Enjo y S marte r L ife!